I'm not currently in the market for one, but i've been trying to find a company or someone that makes a W58 to T50 Bellhousing adaptor. There were a bunch of people that made them before but I can't seem to find any.

If someone knows of someone that can please let me know.

*** Not currently in the market - it's for future reference ! ***

Here you go bro, enjoy... http://www.ogiptech.com/product.html

I've read around for people that have had those and they say that they suck. Apparently they crack. I was thinking something along the lines of an adapter plate

SlideSexy wrote:I've read around for people that have had those and they say that they suck. Apparently they crack. I was thinking something along the lines of an adapter plate

Please post the information you have found on these bell housings. These look like the holy friggin grail to me!
I have been searching for something like this FOREVER!!!
I would have ordered one (like yesterday) but now I am worried because you say you have heard some bad stuff about them. Please enlighten!

-John

If the bellhousing cracks, get a welder and reinforce the crap out of it. It's a lot better than having an offset transmission

Wow I was just doing some research on this since I am thinking about putting a 4ag into my Opel GT

This what I have come with

http://www.hachiroku.com.au/2009/09/new ... 0-adaptor/

http://www.ae86drivingclub.com.au/forum ... llhousings

http://a1turbos.co.nz/mm5/merchant.mvc? ... y_Code=1QT

HTH

niteparts bellhousing is probably the best but not cheap
groupbuy makes them cheaper
http://a1turbos.co.nz/mm5/merchant.mvc? ... y_Code=1QT

Army Fork wrote:If the bellhousing cracks, get a welder and reinforce the crap out of it. It's a lot better than having an offset transmission

Do you still have to cut a larger hole for the shifter with the bell housing? If no then that's a whole lot better than an adaptor plate.

John H. wrote:

SlideSexy wrote:I've read around for people that have had those and they say that they suck. Apparently they crack. I was thinking something along the lines of an adapter plate

Please post the information you have found on these bell housings. These look like the holy friggin grail to me!
I have been searching for something like this FOREVER!!!
I would have ordered one (like yesterday) but now I am worried because you say you have heard some bad stuff about them. Please enlighten!

-John

My other thread about this on HachiRoku.net .. some people personally used them.

http://hachiroku.net/forums/showthread.php?t=32667

ditn wrote:niteparts bellhousing is probably the best but not cheap
groupbuy makes them cheaper
http://a1turbos.co.nz/mm5/merchant.mvc? ... y_Code=1QT

$850 O_O Thats a whole lot of moola for a bellhousing

Does anyone know which W58 tail end works best with the AE86 transmission tunnel?

http://users.tpg.com.au/users/loats/