Hello all,

As I'm putting my 20V black top back together, a thought came to mind, if I am using the old 4AG brackets and accessories (alternator, AC, PS, etc) will I have to use the old water pump or will the 20V one line up with those pulleys?

you will have to use the RWD water pump and pulley to line up with your RWD crank pulley. this is also recomended if you are going to reuse the mechanical fan since the FWD water pumps are not strong enough to hold the extra weight

To reiterate what ga_goosh said:

Use either ALL FWD pulleys

OR

ALL RWD pulleys.

Don't mix & match them for proper belt alignment.

All water pumps will be fine if you're going e-fan.

RWD water pumps ONLY if you plan to bolt the clutch fan up to it.

Will the RWD pump flow correctly with the SP-TEC water relocator?