Page 1 of 1
20v ST bogging.
Posted: Mon Aug 26, 2013 2:59 pm
by 1991celi
sorry for so many posts. just trying to get this engine working right! Here is a video of the problem that will say it all.
https://www.facebook.com/photo.php?v=64 ... 0234749353ignition timing is good. valve timing was good last i checked. STA wire is connected to starter relay (or should be)
Re: 20v ST bogging.
Posted: Mon Aug 26, 2013 4:41 pm
by 1991celi
also, if i have the TPS at about 500 or .5 ohms which is all the way forward. itll bog at around 4k. if i have the TPS at about .6-.7 ohms itll start bogging at around 2k rpm. it also runs much richer.
Re: 20v ST bogging.
Posted: Mon Aug 26, 2013 5:34 pm
by yoshimitsuspeed
Not sure what resistance you are referring to but you need to set the TPS adjustment based off the idl circuit. Procedure should be in the BGB.
Re: 20v ST bogging.
Posted: Mon Aug 26, 2013 6:31 pm
by 1991celi
yoshimitsuspeed wrote:Not sure what resistance you are referring to but you need to set the TPS adjustment based off the idl circuit. Procedure should be in the BGB.
BGB?