Bearings Part Numbers 42mm crank

[TunedToy]

Does anyone know the part numbers for Conrod/Main bearing for a 4age 42mm crank?? Im asking this because i do not know the year of my block and the idiots at the part stores are asking me for year/make/model lol. STD/Bearings

~~ Help ~~ Please ~~

[yoshimitsuspeed]

http://matrixgarage.com/store/bottom-end

[TunedToy]

yoshimitsuspeed im looking for the average bearing part numbers, no highend stuff thanks though . im old enuff already to take the lead off my foot.

sealed power,clevite,beck&arnley?

[yoshimitsuspeed]

I can get Clevite and possibly others. I'll look into it more in the morning.
I like the ACL race because they offer a .025 under so you can polish the crank into tighter tolerances.

[onnaj]

The numbers are:

11701‑16010‑0x (x = can vary depending from number 1 to 5). I thought a set would cost around $100, or just below.

[gotzoom?]

Just say you have a 1991 Toyota Corolla GTS. Problem solved.

[yoshimitsuspeed]

It appears the clevite are mislabled on my distributors website and are in fact 40mm bearings.
I can't find a good part lookup page for them either.
If you aren't willing to pay for the ACLs I would just go into a parts store and ask for bearings from an 89 MR2. That motor will definitely call for 42mm bearings. Just hope their system has it right.

[frankist]

should be acl part no. 4b1780h-std - rod and taiho part no. m043a-std main bearings.

[frankist]

both brands are relatively cheap and easily accessible. =)

[TunedToy]

thank you guys...... love this forum !!!