Short stroke strut service
Re: Short stroke strut service
Bump it up
Last edited by seymour86 on Fri Aug 18, 2017 8:41 am, edited 1 time in total.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
free bump... his work is amazing...
Re: Short stroke strut service
awesome work!
-
- Club4AG Expert
- Posts: 297
- Joined: Thu Aug 15, 2013 4:17 pm
Re: Short stroke strut service
any chance you have a set of shortened strut casings you'd be willing to sell? Thanks - Aaron
Re: Short stroke strut service
Unfortunately i do not have any in stock at the moment.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
bump for crazy seymour
Re: Short stroke strut service
Will NOT trade for pokemon go characters.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
-
- Club4AG Expert
- Posts: 316
- Joined: Thu Jan 10, 2013 11:05 am
- Location: orange county - irvine
- Contact:
Re: Short stroke strut service
bump for a G -
i will be sending you some casings soon =D
i will be sending you some casings soon =D
Rays - Project Mu - TE37 club
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
BLUE MOON / CUSCO
AE86fightclub.com
PM me for Contact
Re: Short stroke strut service
Thanks Ronny! Any time man hit me up when you're ready!!
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
- InitialB
- Club4AG Enthusiast
- Posts: 135
- Joined: Wed Feb 20, 2013 8:58 pm
- Location: Torrance, CA
- Contact:
Re: Short stroke strut service
Will these struts give me 97hp if I'm lucky? Or make my car more crazy than the bride of chucky?
Re: Short stroke strut service
DAAAAAAMNN! Blast from the past!!!!
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
You still offering these services??
-
- Club4AG Pro
- Posts: 644
- Joined: Thu Oct 06, 2016 2:23 pm
- Location: Middle of Hell, Florida
Re: Short stroke strut service
Sent you e-mail
mine is thedesertfox117
mine is thedesertfox117
Success guardian... Successsssssss..
Re: Short stroke strut service
CloudStrife wrote:Sent you e-mail
mine is thedesertfox117
I didn't see anything from you.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
does the cleaning and painting service include disassembly and reassembly of the rotors/hubs? or would that require the disassembly and assembly fee as well?
-
- Club4AG Pro
- Posts: 644
- Joined: Thu Oct 06, 2016 2:23 pm
- Location: Middle of Hell, Florida
Re: Short stroke strut service
You could always just take them off yourself. Would also make shipping easier for both sides. A completely bare strut casing weighs nothing in comparison to a full spindle/strut.
Just my 2 cents..
Just my 2 cents..
Success guardian... Successsssssss..
Re: Short stroke strut service
mycrors4 wrote:does the cleaning and painting service include disassembly and reassembly of the rotors/hubs? or would that require the disassembly and assembly fee as well?
The cleaning charge is basically to pay for my time when someone sends me casings that are absolutely filthy. If you want them painted I would not charge for the cleaning as long as they are not caked in grease. I still do charge for disassemble and reassemble of parts.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
Re: Short stroke strut service
Bumb for quailty work and quick turn around!
If your thinking of doing it just do it
If your thinking of doing it just do it
Re: Short stroke strut service
CloudStrife wrote:You could always just take them off yourself. Would also make shipping easier for both sides. A completely bare strut casing weighs nothing in comparison to a full spindle/strut.
Just my 2 cents..
Main reason I asked is cause I'm local lol
seymour86 wrote:mycrors4 wrote:does the cleaning and painting service include disassembly and reassembly of the rotors/hubs? or would that require the disassembly and assembly fee as well?
The cleaning charge is basically to pay for my time when someone sends me casings that are absolutely filthy. If you want them painted I would not charge for the cleaning as long as they are not caked in grease. I still do charge for disassemble and reassemble of parts.
Sounds good
When I purchase sleeves/springs for the fronts I'll definitely shoot you an email. Luckily for me, the strut casinings I got look pretty damn clean. I was expecting some filfthy stuff with 30 years of grime
-
- Club4AG Pro
- Posts: 644
- Joined: Thu Oct 06, 2016 2:23 pm
- Location: Middle of Hell, Florida
Re: Short stroke strut service
Seymour, sent you email/PM... Haven't heard anything back.. Are you still doing them?
Success guardian... Successsssssss..
Re: Short stroke strut service
quote="mycrors4"]
Main reason I asked is cause I'm local lol
Sounds good
When I purchase sleeves/springs for the fronts I'll definitely shoot you an email. Luckily for me, the strut casinings I got look pretty damn clean. I was expecting some filfthy stuff with 30 years of grime[/quote]
Sounds good man, I'll be here when you're ready
I got you msg. I will get in contact you today.
CloudStrife wrote:You could always just take them off yourself. Would also make shipping easier for both sides. A completely bare strut casing weighs nothing in comparison to a full spindle/strut.
Just my 2 cents..
Main reason I asked is cause I'm local lol
seymour86 wrote:mycrors4 wrote:does the cleaning and painting service include disassembly and reassembly of the rotors/hubs? or would that require the disassembly and assembly fee as well?
The cleaning charge is basically to pay for my time when someone sends me casings that are absolutely filthy. If you want them painted I would not charge for the cleaning as long as they are not caked in grease. I still do charge for disassemble and reassemble of parts.
Sounds good
When I purchase sleeves/springs for the fronts I'll definitely shoot you an email. Luckily for me, the strut casinings I got look pretty damn clean. I was expecting some filfthy stuff with 30 years of grime[/quote]
Sounds good man, I'll be here when you're ready
CloudStrife wrote:Seymour, sent you email/PM... Haven't heard anything back.. Are you still doing them?
I got you msg. I will get in contact you today.
breezefabrication.com
ryan@breezefabrication.com
ryan@breezefabrication.com
-
- Club4AG Pro
- Posts: 644
- Joined: Thu Oct 06, 2016 2:23 pm
- Location: Middle of Hell, Florida
Re: Short stroke strut service
Hey man, looking for this crazy russian guy with ridiculous low prices....
Success guardian... Successsssssss..