lmk what you need. Parts will be shipped from Ohio

Air cleaner assembly SOLD
EGR valve SOLD
Valve cover SOLD
Timing belt cover SOLD
Exhaust manifold SOLD
Distributor with plug wires SOLD
Carb and parts SOLD
Rocker Arm assembly SCRAPPED
Cylinder head SCRAPPED
Clutch fan SOLD
Intake manifold SOLD

Alternator with brackets


Dipstick


Water pump pulley


Starter, almost new


Camshaft (distributor drive gear sold)


Fuel Pump


Water lines and elbows

What's the cost for the water pump pulley and alternator brackets? Ship to 90058 thank you.

Got the PM. It wouldn't let me respond with a reply. I understand sounds good.

Bump. Going to be in the 30s next weekend so can start taking this engine apart

did/does it run i need a complete running shortblock

Bump, new pics added.

bump to the top!

Bump to the top!

Looking for the air cleaner complete and egr assembly. Shipping to 90630 in SoCal? I'll send a PM as soon as I can. Thanks.

I need the timing cover with bolts and the plug the plugs to the choke on the carburetor. I also need the carburetor bracket/plate and sensor connector. Shipping to 90037 in SoCal. Thanks

How much for the motor brackets?

Clutch_Kick_Lou wrote:How much for the motor brackets?

Not for sale as of now. Will be when i get the engine out.

Hey buddy, looking for the distributor cam drive gear, goes on back of the cam by the dizzy! Would you happen to still have it

previa19 wrote:Hey buddy, looking for the distributor cam drive gear, goes on back of the cam by the dizzy! Would you happen to still have it

Yes, still have it. PM me

Ok I have a better understanding of what Im missing for my AE86 SR5 now. I need the following parts:

1. Carburetor heater bracket with connector (pictured)
2. Intake manifold air vacuum sensor fitting( located in between carburetor area and water temperature sensor near the upper radiator hose) I cant really see it it your pictures because all the vacuum hoses are in the way. It has 2 vacuum hoses that connect to the dizzy vacuum solenoid. I could provide pictures of said location via phone if necessary I just really need this part since Im completely missing it.
3. Timing belt cover with bolts (pictured)
4. Might need distributor but will let you know for sure later. Have you tested the vacuum solenoid to check if all 3 valves are holding vacuum?

Please PM me for any questions you might have I really need these parts. Can you provide prices. Thanks

Bump it to the top mane!!!

Was wondering if you had the headers for sale?

I need the water pump pulley and a top valve cover nut if you still have them. Price shipped to 58203 please?

Any chance this is an automatic sr5? If so how much for auto Trans crossmember to 90201

Sorry this is a manual trans

Got the parts yesterday. Items well packaged and shipped on time. Thank You!

Thanks for the feedback, bump!

Bump to the top!

do you have the remote thermostat housing?

How much for the carb shipped to 36271? Also maybe the distributor if the vacuum advance is still good!

How much would it be to ship the 4ac manual trans including bellhousing, starter, etc to 28078?

Hey, sorry it won't let me pm you datu, but just one more question, do you know how many amps that alternator puts out?

4wdeconobox wrote:Hey, sorry it won't let me pm you datu, but just one more question, do you know how many amps that alternator puts out?

It looks like a re-manufactured ND 14672 (found this on a sticker) so it's a 55 amp.

RedTaco86 wrote:How much would it be to ship the 4ac manual trans including bellhousing, starter, etc to 28078?

Sorry, was going to keep the trans. I can sell the bell housing when I get it out.

Well dang! haha, I'll let you know something by the end of the week on the carb and dizzy, gotta see what my paycheck looks like haha. Thanks!