Page 1 of 1

Parts for $ale!!!!New Parts added 06/10/2015

Posted: Mon May 25, 2015 12:22 pm
by gaijin_rokurunner
Have the following parts for sale...if interested email me at nuffsaid02@aol.com...paypal is the same email.
Apexi hybrid intercooler: Used in good condition...measurements are shown in the picture....will fit ae86 with some mechanical massaging...to big for my setup so won't be using it...$250 Plus shipping
Image
Image
Image
Image
Image
Image
Image

1JZ 380cc injectors, a must for any modified 20v...cleaned and balanced, was my spare set so haven't used since servicing: $150 set of 4 shipped ( only have one set other was sold already)
Image

Omori Gauges, all are in great working condition, some have a few nicks here and there please look at pictures...price will reflect condition: Like New Electrical 45mm EGT with new probe $100 shipped (reads in Fahrenheit), 52mm White face Volts $75 shipped, 52mm White face Vacuum $75 shipped, 10k 52mm RPM Tach (very rare this size) with mounting stand $150 shipped, Stack mechanical water temp 63mm $75 shipped
Image
Image
Image
Image


OEM 20v alt bracket with custom tensioner modified to be used with rwd engine mount brackets : $45 shipped
ImageImage

Misc parts for sale ( brake master, visors, vacuum block SOLD) everything else hit me up for price.
Image

S2000 Gauge cluster with pig tails,yellow box speed calibrator( requires speed sensor) and fuel level calibrator. Was working in my car swapping to a different setup...u will need to get a bezel from JSP or I will give whoever purchases this my JSP bezel once I get it back from being molded for a blank carbon one. $300 Shipped u won't find these clusters alone for that much with pig tails anywhere. If you want water temp and oil temp or pressure to work you will have to find a way to make that work...i didn't hook that up because i had individual gauges for that.
Image
Image
Image

Custom Saikuo Michi 10an duel port catch can..can be vented to atmosphere or recirculated, drain on bottom..$95 shipped ....this was custom made for 135 dollars and it's a 10 week wait due to popularity and the fact that they are hand made if buy one direct..I switched to a duel can setup for boosted applications so selling this off
Image
Image

Oversized underdrive alternator pulley...works well if you have a smaller crank pulley which makes the alternator spin faster...$45 shipped (its the black pulley pictures just shows the size compared to stock size)
Image

Re: Parts for $ale!!!!

Posted: Mon May 25, 2015 5:29 pm
by grappletech
That s2k cluster would like nice in my Rolla with beams lol.... and couch

Re: Parts for $ale!!!!

Posted: Tue May 26, 2015 10:46 am
by ritz
Tried to email you, didn't work.

Re: Parts for $ale!!!!

Posted: Tue May 26, 2015 1:33 pm
by gaijin_rokurunner
sorry fixed the email it was wrong

Re: Parts for $ale!!!!

Posted: Tue May 26, 2015 4:17 pm
by gaijin_rokurunner
Greddy Gauge $$$$$$OLD

Re: Parts for $ale!!!!

Posted: Thu May 28, 2015 4:44 am
by gaijin_rokurunner
to the top

Re: Parts for $ale!!!!

Posted: Mon Jun 01, 2015 4:21 pm
by gaijin_rokurunner
to the top

Re: Parts for $ale!!!!

Posted: Tue Jun 09, 2015 9:21 pm
by gaijin_rokurunner
Up to the top

Re: Parts for $ale!!!!

Posted: Wed Jun 10, 2015 8:39 am
by beyjer
Paypal sent for omori pressure and temp, thanks!

Re: Parts for $ale!!!!

Posted: Wed Jun 10, 2015 4:38 pm
by gaijin_rokurunner
Oil temp and pressure gauges sold.....rest still for sale

Re: Parts for $ale!!!!New Parts added 06/10/2015

Posted: Mon Jun 15, 2015 6:18 am
by gaijin_rokurunner
to the top

Re: Parts for $ale!!!!New Parts added 06/10/2015

Posted: Thu Jun 18, 2015 5:33 am
by gaijin_rokurunner
COPS $old!

Re: Parts for $ale!!!!New Parts added 06/10/2015

Posted: Thu Jun 25, 2015 10:42 am
by gaijin_rokurunner
bump to the top....will entertain reasonable offers