I have another batch of dampers that came in - i have 4 left at the moment.

Please let me know if you would like to have a set








install is very simple:
1. remove the 2 fender bolts on each side - ( closest from windshield ) and replace with supplied flat allen heads in the kit.
2. replace the 3rd fender bolt with the supplier ball bolt for the hood damper
3. remove the 12mm hinge bolt for the hood and attached the damper bracket and screw that on.
4. close and open your hood a few times to break in the damper - this will help smooth out and lubricate the inside parts of the damper.

the set is 105 bux SHIPPED..

PLEASE EMAIL ME at RNDOFFICE86@gmail.com


thanks all.

Ron

Did you save me one?

yaya

thanks all!

review from Ed,

Got a pair of these from Ronny. Thanks for the knuk kunk hook up dawg! Great quality and I'm liking the carbon fiber covering on the shocks. Now I don't have to risk having the hood accidentally fall on me when working on my engine. There were numerous times I almost knocked out the OG hood latch on the Corolla. Plus my hood latch is unstable. These hood shocks give my classic Corolla a modern look and feel.
Here's some photos:

Before: (original hood latch)




The latch is actually coming apart and it not stable.


After:



Here's the components:



Installation:







Done:



Manual Instruction: Easy to read and understand.

Installation: Straight-forward.

BUMP got 7 left.

=D

IM sent! Thanks Ronny

sent you a PM

thanks for the orders guys!

2 left -

hopefully will recieve more in next month or so..

great parts Ronny! slight clearance issue with the fender on the Carina but using a spacer for "venting" anyways! I'll add pics tomorrow!

rad! should be good! 1 LEFT!

final batch arrived.. I will not be making these unless people ask for them..

but i have 10 left for the last batch untill further notice..


please let me know if you would like one.

thanks!

Ron

ronny wrote:final batch arrived.. I will not be making these unless people ask for them..

but i have 10 left for the last batch untill further notice..


please let me know if you would like one.

thanks!

Ron

hi ron,

please pm me a price and where i can send payment.

thank you,

uppy upp

BUMPAage no more after this batch.. im going to finish up other products i am making. moving on to the next little project.

pow

payment sent

what is the Paypal ID email for payment? isnt it your sig email?
RNDOFFICE86@gmail.com please claim payment

I emailed you. That is my email. Not Paypal. Sent you an email on the info

thanks for the orders!!

Can't wait to receive mine. I always hated the hood props location

got mines in! thanks again!

bump bump... i have 6 left..

You have a PM, sir!

Sold a set to me!

Thanks again, Ronny!

bump bump!