Trying to clean up at least half of the parts I've accumulated over the years.
Please email inquiries to longtran562 (at) gmail (dot) com
Any misc things you see that I don't specifically price, please just make offers.
Pick-up preferred and given priority. Shipping available at buyer's expense.

AE86 NST Shortshifter Kit NIB - sold
AE86 4AGE factory intake box, MAF, and tubing - sold
4AGE valve covers - sold
AE86 front bumper side trim pieces - sold
AE86 Prothane sway bar end link bushing set NIB - sold
AE86 Ashtray - sold
AE86 Downpipe Exhaust Bracket - sold
AE86 Zenki Eyelids, painted black with small crack - sold
4AGE Timing cover with sticker and middle cover - sold
Ignition coil cover - sold
AE86 factory 4.3:1 ring & pinion - sold
AE86 factory front control arms - sold
AE86 Center console with tear in rubber trim at e-brake opening - sold
HVAC internals from behind dash - trashed
20v Plenum- sold
Used Greddy Oil Catch Can (dirty but will polish up, no lines) - sold

AW11 MR2 single side vent - $15 obo



4AGE Toyota air filter NIB - $5 obo


AE86 Bendix front brake pads NIB - $10 obo
http://www.summitracing.com/parts/ben-mkd242iq/applications/make/toyota/model/corolla/submodel/sport-gts/year/1986


HVAC Trim - $15 obo


Misc vents from burgandy dashboard - $5 obo


Used AE86 factory front tension rods - $10 obo


Used AE86 Zenki front turn signals - $15 obo (for both, one set has fine cracks in lens and other set missing connectors and little wires to work with)

You happen to have or kno someone who has a stock 16v exhaust mani downpipe? Thx.

No, unfortunately I tossed mine years ago.

hey brother where in socal are you, interested in zenki eyelids.

email me at ryan19522@yahoo.com, i'll either pick up or paypal you this week

Near Cal State Long Beach

Emailed

Do you have everything needed to install heat? If so how much shipped to 95687

FDeeznuts wrote:Do you have everything needed to install heat? If so how much shipped to 95687

Off the top of my head, yes. The only things that could be missing or misc nuts/bolts that go into firewall. All the other fasteners that screwed into the components were put back in to keep handy.

There should be the heater control valve that goes in engine bay, heater core, blower motor, the plenum, and misc ducting. Items are all fairly visible in the pictures above.

It would be a pretty big box, but shouldn't be more than $25.

interested in the short shifter kit. shoot me an email. hengon@gmail.com

E-mailed you about valve covers

Emailed about AE86 Center console with tear in rubber trim at e-brake opening

Thank you for the valve covers. free bump for you

bump for offers please... I don't want to pack this stuff all up again and throw it into the attic for another year.

Great seller and super fast shipping for an awesome price! Thanks again buddy!

Please let me know if short shifter falls through. I'll take it.

sekang0 wrote:Please let me know if short shifter falls through. I'll take it.

It was supposed to be picked-up today but buyer rescheduled for tomorrow. If it doesn't sell tomorrow, you can come get it. Thanks for the interest.

RidgeRacer wrote:

sekang0 wrote:Please let me know if short shifter falls through. I'll take it.

It was supposed to be picked-up today but buyer rescheduled for tomorrow. If it doesn't sell tomorrow, you can come get it. Thanks for the interest.

Ah ok. I'll need it shipped tho to 95209. Ok thx.

sekang0 wrote:

RidgeRacer wrote:

sekang0 wrote:Please let me know if short shifter falls through. I'll take it.

It was supposed to be picked-up today but buyer rescheduled for tomorrow. If it doesn't sell tomorrow, you can come get it. Thanks for the interest.

Ah ok. I'll need it shipped tho to 95209. Ok thx.

Shipping would be $6 - just an FYI

how much for the tension rods shipped to 78753?

jay_trueno wrote:how much for the tension rods shipped to 78753?

Shipping is $15 via USPS large flat rate box. $30 for tension rods shipped?

RidgeRacer wrote:

jay_trueno wrote:how much for the tension rods shipped to 78753?

Shipping is $15 via USPS large flat rate box. $30 for tension rods shipped?

deal. where can i email you?

jay_trueno wrote:

RidgeRacer wrote:

jay_trueno wrote:how much for the tension rods shipped to 78753?

Shipping is $15 via USPS large flat rate box. $30 for tension rods shipped?

deal. where can i email you?

Email is at the top of the thread =)

longtran562 (at) gmail (dot) com

bump

ring gear is it in decent condtition and how much shipped ti 07026

can the AE86 Bendix front brake pads NIB - $10 be used with the stock calipers???

Ring & Pinion are pending with a back-up buyer.

The Bendix pads are stated for Akebono calipers. I'm guessing the reason why they are still new is because I couldn't use them. You might want to research, I could be wrong or they could fit SR5s or FX-16s.

never mind then thanks and sorry about the question

De nada

emailed regarding r&p, lca's, and bumper lights.

thanks man

bump for you

Want to buy center console txt me at 3239212277