JE pistons Belfab rods TED cams Electromotive Turbo manifold

beeker1-9
Club4AG Regular
Posts: 46
Joined: Tue Apr 14, 2015 6:21 am

JE pistons Belfab rods TED cams Electromotive Turbo manifold

Postby beeker1-9 » Mon Apr 27, 2015 7:24 am

http://www.ebay.com/itm/261867849621?ss ... 1555.l2649
Up for auction is a parts lot to build a high performance Toyota 4AGZE Supercharged or 4AGTE Turbo (or even a TWINCHARGE) engine. It includes the following:

JE 82mm bore dished extra heavy-duty Turbo/Supercharger pistons (can be used with 16v or 20v head) 9:1 c/r (varies based on head)

Lightweight Belfab H-beam 4AG connecting rods (lighter than blacktop rods)

TED Components Kamakazi Kams 4AG 16v Supercharged/Turbo Camshafts (KK115 7.70 mm lift 272º Adv.Duration 224º Dur. @ 0.050" Good power on stock engine. +20hp 28HpT) for 4AGZE or 4AGTE (Don't require adjustable gears, has indexed holes for knock-pin)

ARP 4AGE 16v head studs

(Over $1800 new Buy-It-Now for $1200)

OR at an extra cost I have available for purchase:

AW11 4AG 16v Turbo manifold (Rally2 manifold) extra heavy duty T3 turbo flange with (basic) heat shield
&
Electromotive TEC2 standalone EMS system with GM 2-bar MAP sensor and MSD high performance sparkplug wires. This is a programmable ECU system fully tuneable and has the latest EEPROM upgrade. Needs crank sensor setup to be complete. Was being used on 4AGTE 20v but was upgraded to TEC3.
($1900 Buy-It-Now for Pistons, Rods, Cams, Studs, Turbo header, EMS, and 440cc injectors)
If you purchase everything I will include a set of 440cc 7MGTE top-feed injectors.

All parts are new, bottom end was assembled but never ran. Electromotive standalone is used but functional.

FREE SHIPPING IN CONTINENTAL US!! WILL SHIP INTERNATIONAL AT COST.

Keywords: AW11 AE86 AE92 AE101 AE111 corolla mr2 prism gsi 4a-ge 4age 4a-gze 4agze 4age 20v boost JDM drift hachi roku nos JDM

Brendoninhawaii
Club4AG Enthusiast
Posts: 79
Joined: Wed Jul 31, 2013 11:26 pm

Re: JE pistons Belfab rods TED cams Electromotive Turbo mani

Postby Brendoninhawaii » Tue Apr 28, 2015 1:01 pm

Can i see pics of the turbo manifold? And how much you want for it?

beeker1-9
Club4AG Regular
Posts: 46
Joined: Tue Apr 14, 2015 6:21 am

Re: JE pistons Belfab rods TED cams Electromotive Turbo mani

Postby beeker1-9 » Tue Apr 28, 2015 3:50 pm

I emailed you.

beeker1-9
Club4AG Regular
Posts: 46
Joined: Tue Apr 14, 2015 6:21 am

Re: JE pistons Belfab rods TED cams Electromotive Turbo mani

Postby beeker1-9 » Tue Apr 28, 2015 4:35 pm

Will take $1050 shipped for the pistons, rods, cams via Paypal outside of eBay or $1200 on eBay (10% seller fees) if interested or have any questions feel free to email me at mrbc013(a)gmail(dot)com

beeker1-9
Club4AG Regular
Posts: 46
Joined: Tue Apr 14, 2015 6:21 am

Re: JE pistons Belfab rods TED cams Electromotive Turbo mani

Postby beeker1-9 » Sat May 02, 2015 9:50 am

Bump, looking to sell these to pick up a new car. Best offer!

turboae92
Club4AG Enthusiast
Posts: 93
Joined: Tue Feb 19, 2013 4:17 pm
Location: miami fl

Re: JE pistons Belfab rods TED cams Electromotive Turbo mani

Postby turboae92 » Mon May 11, 2015 6:59 pm

Can you post picture of the turbo manifold.I bought the gze pistons of you on ebay.

beeker1-9
Club4AG Regular
Posts: 46
Joined: Tue Apr 14, 2015 6:21 am

Re: JE pistons Belfab rods TED cams Electromotive Turbo mani

Postby beeker1-9 » Tue May 12, 2015 4:17 am

Bump. Willing to seperate the parts. Make an offer.