Feeler 7A block
Feeler 7A block
Another project might die for lack of space and time....... 7AFE block bored .5mm over with Maxspeeding 'H' beam rods and cast pistons. Pistons are high comp config aftermarket generic type. Assembly was balanced with a 4AF flywheel. Crank is in the block. Currently in storage, but I need the space. I have a small port head available as well. I'm located in central CA. Don't want to deal with shipping, I can go as far south as Pismo, maybe north to San Jose. Prefer south as the block is stored in the SLO area. I can get pics in about a week.
One shot, one kill.
Re: Feeler 7A block
How much are you asking?
Yes - I cut the front end of my car off.
I had frame damage!!
I had frame damage!!
Re: Feeler 7A block
any idea what the CR would be with a .5 headgasket and the smallport head with those "generic" pistons? and does generic mean like ebay??? not that im opposed, just wondering. I'm in SLO by the train station
Re: Feeler 7A block
Compression with a stock head gasket, 1.2mm, is right around 11.5-1, Without doing the math, a .5mm gasket would probably work out to 12+ -1. What I mean by generic is the shop that did the work ordered the parts and they came in a white box I have no real Idea came from. The head is gone though. Sorry I didn't reply earlier, the thread got a little buried.
One shot, one kill.
-
- Club4AG Expert
- Posts: 243
- Joined: Fri Jan 11, 2013 12:46 pm
- Location: G-town
Re: Feeler 7A block
Is this still up. 3104264316 looking to buy the block
Re: Feeler 7A block
Won't be able to text until I go into town, no service at home. But the block is still available and located in the SLO area.
One shot, one kill.