Page 1 of 1

For Sale: My 4A-GZE Project motor.

Posted: Tue Nov 03, 2015 9:55 am
by Kiraush
For Sale: [Engine] 1988 Supercharged Toyota MR2 16-valve 4A-GZE

Location: Southern Oregon

800$

I'm selling my project motor, I was collecting parts to rebuild it to put into my AE86 but I ended up finding a 20 valve 4AGE to put into it instead!

Can deliver depending on where you're located.

Includes:

Nearly complete engine including the original thrashed bottom end,
Also includes the new block that I purchased to replace the ruined one.

Comes with all the harnesses and literally everything for the 4A-GZE and then some!

All it is missing is the ruined pistons and rods!

Story: It looks like the previous owner seized it up and tried to rev it until it got better, that's the only explanation I can come up with.

Image

Image

Image

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Nov 12, 2015 12:56 am
by Kiraush
Bumpppppppppppppp

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Nov 12, 2015 6:52 am
by 80miout6ftundr
supercharger n ecu?

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Nov 12, 2015 10:08 am
by Kiraush
80miout6ftundr wrote:supercharger n ecu?

Everything you could want any more,
ECU, All harnesses, Supercharged AW11 Gauge Cluster (Fits in AE86, AW11, and maybe a couple others), of course the SC12 Supercharger is in there :D
I think I have a few other small goodies I'm forgetting about.

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Nov 12, 2015 10:19 am
by 80miout6ftundr
Kiraush wrote:
80miout6ftundr wrote:supercharger n ecu?

Everything you could want any more,
ECU, All harnesses, Supercharged AW11 Gauge Cluster (Fits in AE86, AW11, and maybe a couple others), of course the SC12 Supercharger is in there :D
I think I have a few other small goodies I'm forgetting about.

ooo how much? pics?

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Nov 12, 2015 3:40 pm
by Kiraush
80miout6ftundr wrote:ooo how much? pics?


Read the first post :P

I have the ones I posted above, I think I have a few others but what is it you want a picture of exactly?

The motor is currently disassembled and in that blue and red box because I was collecting parts to rebuild and build up the bottom end.

The bottom end will definitely need a little bit of attention, but the whole top-end of the motor is there, and almost all of the bottom end.

I believe all it needs right now is pistons, rods, and possibly a new crank.

I was saving up to get the hecka good stuff, had gotten Arias pistons, and almost had rods coming in but then I found my 20v motors and got those instead.

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Nov 12, 2015 4:01 pm
by 80miout6ftundr
Kiraush wrote:
80miout6ftundr wrote:ooo how much? pics?


Read the first post [emoji14]

I have the ones I posted above, I think I have a few others but what is it you want a picture of exactly?

The motor is currently disassembled and in that blue and red box because I was collecting parts to rebuild and build up the bottom end.

The bottom end will definitely need a little bit of attention, but the whole top-end of the motor is there, and almost all of the bottom end.

I believe all it needs right now is pistons, rods, and possibly a new crank.

I was saving up to get the hecka good stuff, had gotten Arias pistons, and almost had rods coming in but then I found my 20v motors and got those instead.

i have a fresh redtop motor just need sc ecu and harness

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Nov 12, 2015 4:04 pm
by Kiraush
80miout6ftundr wrote:
Kiraush wrote:
80miout6ftundr wrote:ooo how much? pics?


Read the first post [emoji14]

I have the ones I posted above, I think I have a few others but what is it you want a picture of exactly?

The motor is currently disassembled and in that blue and red box because I was collecting parts to rebuild and build up the bottom end.

The bottom end will definitely need a little bit of attention, but the whole top-end of the motor is there, and almost all of the bottom end.

I believe all it needs right now is pistons, rods, and possibly a new crank.

I was saving up to get the hecka good stuff, had gotten Arias pistons, and almost had rods coming in but then I found my 20v motors and got those instead.

i have a fresh redtop motor just need sc ecu and harness


Well come get all of it and have some extra parts :D
Even for just those things the whole motor is a steal, could part out what you don't need and make a decent amount of the money back.

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Nov 12, 2015 6:24 pm
by 80miout6ftundr
too far

Re: For Sale: My 4A-GZE Project motor.

Posted: Fri Nov 13, 2015 12:14 pm
by Kiraush
80miout6ftundr wrote:too far


Well, I could ship you the small stuff you need for 700$, if you'd like.

Supercharger, ECU, Harnesses, and I'd even throw in the Supercharged cluster for you.

Re: For Sale: My 4A-GZE Project motor.

Posted: Fri Nov 13, 2015 12:46 pm
by 80miout6ftundr
Kiraush wrote:
80miout6ftundr wrote:too far


Well, I could ship you the small stuff you need for 700$, if you'd like.

Supercharger, ECU, Harnesses, and I'd even throw in the Supercharged cluster for you.

no thanks glws

Re: For Sale: My 4A-GZE Project motor.

Posted: Sat Nov 14, 2015 2:12 pm
by Kiraush
bbbbbbbbbbbbbbbbbbbb

Re: For Sale: My 4A-GZE Project motor.

Posted: Sun Nov 15, 2015 12:04 pm
by Kiraush
uuuuuuuuuuuuuuuuuuuuuuuuu

Re: For Sale: My 4A-GZE Project motor.

Posted: Mon Nov 16, 2015 9:46 am
by Kiraush
mmmmmmmmmmmmmmmmmmmmm

Re: For Sale: My 4A-GZE Project motor.

Posted: Mon Nov 16, 2015 4:52 pm
by Twincamman5
Do u still have head/block n it's a small port correct??

Re: For Sale: My 4A-GZE Project motor.

Posted: Tue Nov 17, 2015 11:02 am
by Kiraush
Twincamman5 wrote:Do u still have head/block n it's a small port correct??


Double checked Sherwood and yes they're small port - http://www.billzilla.org/4agstock.htm
I have the whole original engine, plus an extra block I had gotten just in case the first wasn't going to be saveable (I wanted to just do a stock rebuild, so if it needed to be built up I was just going to put the new bottom end in)

Re: For Sale: My 4A-GZE Project motor.

Posted: Tue Nov 17, 2015 11:31 am
by Twincamman5
Would u sell jus the head?

Re: For Sale: My 4A-GZE Project motor.

Posted: Tue Nov 17, 2015 11:49 am
by Twincamman5
Text me 216-536-7039

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Nov 19, 2015 12:18 am
by Kiraush
bbbbbbbbbbbbb

Re: For Sale: My 4A-GZE Project motor.

Posted: Wed Nov 25, 2015 9:19 pm
by bluebox376
I'm interested, but I'm a bit south of you. How far are you willing to deliver..?

Re: For Sale: My 4A-GZE Project motor.

Posted: Thu Dec 17, 2015 9:06 pm
by Kiraush
bluebox376 wrote:I'm interested, but I'm a bit south of you. How far are you willing to deliver..?


Parting it out, was putting in too much effort to sell a motor for dirt cheap lol.
It's not even half gone and I've already earned more than 800$ lol