Formula Atlantic Race Shop Making Room

sekang0
Club4AG Expert
Posts: 202
Joined: Fri Jan 11, 2013 7:46 pm
Location: Stockton, CA

Re: Formula Atlantic Race Shop Making Room

Postby sekang0 » Wed Mar 20, 2013 10:29 am

lol N. Korea
'85 GT-S project since 2010
Image

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Wed Mar 20, 2013 3:28 pm

Image

And another manifold sold, #2(left) is going down to Cally...


I was somewhat amazed at the interest of the new TRD crank.

Image

To all the people who contacted me about the NEW TRD crank.. There are a few more available :eek:

Price is still $2000.


email address: oldeskewltoy AT yahoo.com PLEASE title your email "NOS crank"
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Davegt27
Club4AG Enthusiast
Posts: 138
Joined: Thu Jan 10, 2013 10:35 pm
Location: co

Re: Formula Atlantic Race Shop Making Room

Postby Davegt27 » Wed Mar 20, 2013 4:55 pm

I sent you an e-mail in case the other guys don’t want the dry sump covers
Davegt27 Code One Racing

ritz
Club4AG Enthusiast
Posts: 186
Joined: Wed Jan 09, 2013 7:19 pm

Re: Formula Atlantic Race Shop Making Room

Postby ritz » Thu Mar 21, 2013 8:35 am

Any advantage on running a TRD crank for a nearly stock bluetop?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu Mar 21, 2013 9:12 am

Davegt27 wrote:I sent you an e-mail in case the other guys don’t want the dry sump covers


Don't think I got it.... check your pm

ritz wrote:Any advantage on running a TRD crank for a nearly stock bluetop?


none.......
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
Spoold86
Club4AG Enthusiast
Posts: 131
Joined: Sun Jan 13, 2013 3:40 am
Location: Wilsonville OR
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby Spoold86 » Sat Mar 23, 2013 2:15 am

Thumbs up for a great seller :D

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Sun Mar 24, 2013 4:19 pm

oldeskewltoy wrote:I was somewhat amazed at the interest of the new TRD crank.

Image

To all the people who contacted me about the NEW TRD crank.. There are a few more available :eek:

Price is still $2000.


email address: oldeskewltoy AT yahoo.com PLEASE title your email "NOS crank"



I've gotten 2 responses so far... expect to place the order @ the end of this(3/28), or beginning of next(4/1) week.

Davegt27 wrote:I sent you an e-mail in case the other guys don’t want the dry sump covers


In the mean time, one of the billet front covers sold, there is only one of these left....

Image
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Davegt27
Club4AG Enthusiast
Posts: 138
Joined: Thu Jan 10, 2013 10:35 pm
Location: co

Re: Formula Atlantic Race Shop Making Room

Postby Davegt27 » Fri Mar 29, 2013 8:31 pm

Got the dry sump front cover
Thanks
Davegt27 Code One Racing

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Sat Mar 30, 2013 9:26 am

Davegt27 wrote:Got the dry sump front cover
Thanks



You are welcome!!!! ...and THANK YOU!
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Reuterskiold
Club4AG Enthusiast
Posts: 55
Joined: Mon Jan 21, 2013 6:48 am

Re: Formula Atlantic Race Shop Making Room

Postby Reuterskiold » Sat Mar 30, 2013 10:24 am

My thing is with the cranks, they may be damaged but you have them laying on their sides, not on a rack, or straight up and down. Coll pieces, but basically just cool artwork now

KonaTrueno723
Club4AG Expert
Posts: 406
Joined: Mon Jan 21, 2013 5:02 pm
Location: 50th Northrop-Skylab-Lockheed MD/B 6891
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby KonaTrueno723 » Sat Mar 30, 2013 1:09 pm

Oldeskewltoy..do you have a better pic of the trd sump pan at the far right? Can you send it to my pm please? I may also have a buyer for that other front cover for you as well..thanks!
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega

KonaTrueno723
Club4AG Expert
Posts: 406
Joined: Mon Jan 21, 2013 5:02 pm
Location: 50th Northrop-Skylab-Lockheed MD/B 6891
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby KonaTrueno723 » Sat Mar 30, 2013 1:29 pm

Reuterskiold wrote:My thing is with the cranks, they may be damaged but you have them laying on their sides, not on a rack, or straight up and down. Coll pieces, but basically just cool artwork now


^^artwork display indeed..otherwise, a good crank would be standing straight at my shop
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega

rocksteadyracer
Club4AG Enthusiast
Posts: 65
Joined: Sun Jan 13, 2013 5:16 pm

Re: Formula Atlantic Race Shop Making Room

Postby rocksteadyracer » Sat Mar 30, 2013 6:20 pm

have e mailed you as dovorany@msn.com check your junk mail

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Mon Apr 01, 2013 12:44 pm

rocksteadyracer... I've replied to you...


KonaTrueno723...

Image
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

KonaTrueno723
Club4AG Expert
Posts: 406
Joined: Mon Jan 21, 2013 5:02 pm
Location: 50th Northrop-Skylab-Lockheed MD/B 6891
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby KonaTrueno723 » Mon Apr 01, 2013 3:59 pm

oldeskewltoy=Thanks! Both those inquries mentioned will be pending on customers decision,so i will let you know..

Now i see the broken corner on that sump pan,but its very usable still! awesome..
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Wed Apr 03, 2013 9:08 am

KonaTrueno723 wrote:oldeskewltoy=Thanks! Both those inquries mentioned will be pending on customers decision,so i will let you know..

Now i see the broken corner on that sump pan,but its very usable still! awesome..


VERY useable in anything BUT an Atlantic type installation, where the oil pan is part of the cars frame :shock:


In the mean time.... the manifolds are disappearing :) 5 gone.

Image



To re-cap what is currently still available...
There is still one newer style Atlantic cover left - $600, there is also the TRD center cover - $175 (NEW PRICE!), there are the TRD injection system - $1000, and still plenty of dry sump pans.... (odd I thought these would have sold quickly)
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu Apr 04, 2013 12:07 pm

Well.... not quite Toyota..... BUT... how about a proper rotating (reverse for Honda that is) Honda "B"............

Image

This is a B16 that has been completely modified to run OPPOSITE of all Honda B engines so it could be used in an Atlantic car :o :o :o It is equipped with a full dry sump system.

This is no longer VTEC, but it does rev to 10k rpm, and plants 240hp :mrgreen:

price as of now is $10,000 but they will entertain offers!!!
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
Rogue-AE95
Club4AG Expert
Posts: 493
Joined: Thu Jan 10, 2013 4:03 pm
Location: Tampa Bay, FL

Re: Formula Atlantic Race Shop Making Room

Postby Rogue-AE95 » Thu Apr 04, 2013 1:15 pm

How was that accomplished? Intake cams become exhaust cams and vice-versa? How about the oiling system?

I'm curious because I had asked a forum once about whether they thought it was possible to reverse-rotation a Honda B or D series. Basically it was a "no," or at least, not cheap or worthwhile.
'88 Corolla All-Trac x2 (manual, auto)

Billy_Andrea
Club4AG Expert
Posts: 423
Joined: Thu Jan 10, 2013 10:08 pm
Location: SF

Re: Formula Atlantic Race Shop Making Room

Postby Billy_Andrea » Thu Apr 04, 2013 1:44 pm

The reverse has been done for quite a while now. Popular in the UK in red rally cars.
Very good price !!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu Apr 04, 2013 5:38 pm

Thanks Billy... yeah... the shop is looking to clear the crap.......


Rogue-AE95 wrote:How was that accomplished? Intake cams become exhaust cams and vice-versa? How about the oiling system?

I'm curious because I had asked a forum once about whether they thought it was possible to reverse-rotation a Honda B or D series. Basically it was a "no," or at least, not cheap or worthwhile.



Note the belt path.... that is part of it... see how the belt runs the water pump in the correct direction even though the belt is now running the opposite way?

cams are all custom, and there isn't a conventional oil pump, it has a belt driven dry sump system just like an Atlantic 4AGE... the rest is just typical stuff... the engine just rotates the other way so you if you are a TRUE Honda "B" fan... buy this engine and mount a Honda "B" in a longitudinal fashion (maybe in your Corolla :shock: )
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Fri Apr 05, 2013 3:45 pm

Back to Toyota...... :D

Image
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

DatGuy217

Re: Formula Atlantic Race Shop Making Room

Postby DatGuy217 » Sun Apr 07, 2013 6:56 pm

Are all the non cop valve covers sold already

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Mon Apr 08, 2013 2:01 pm

DatGuy217 wrote:Are all the non cop valve covers sold already


yes... as of now the only cam cover available is the newer style one in gold.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
carbd7age
Club4AG Pro
Posts: 803
Joined: Sat Jan 12, 2013 5:56 am
Location: Chattanooga, TN

Re: Formula Atlantic Race Shop Making Room

Postby carbd7age » Thu May 02, 2013 6:38 am

Intake manifolds 3 and 4, what size are the carb side ports? My TRD copy manifolds is massive compared to my carbs. I am going to make some tapered phenolic spacers, but the transitions is still pretty steep.
Eric'sFreeAE86 from the old site
Knockoff Crew member #0001

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu May 02, 2013 8:19 am

carbd7age wrote:Intake manifolds 3 and 4, what size are the carb side ports? My TRD copy manifolds is massive compared to my carbs. I am going to make some tapered phenolic spacers, but the transitions is still pretty steep.


manifolds #3 and #4 are excess ported (experimental), I only sell this with the understanding that they are NOT likely useable. Think of them as engineering artwork.


Further update: The last Atlantic cover sold, the TRD coil cover with it. Also the last billet front cover sold as well.

I will have a few new things to post up soon, I'm also still working on getting those cams.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
carbd7age
Club4AG Pro
Posts: 803
Joined: Sat Jan 12, 2013 5:56 am
Location: Chattanooga, TN

Re: Formula Atlantic Race Shop Making Room

Postby carbd7age » Thu May 02, 2013 4:38 pm

So they're even bigger than what I have lol. Ok thanks boss.
Eric'sFreeAE86 from the old site
Knockoff Crew member #0001

kouki1986
Club4AG Enthusiast
Posts: 131
Joined: Fri Jan 11, 2013 10:31 pm

Re: Formula Atlantic Race Shop Making Room

Postby kouki1986 » Fri May 03, 2013 11:22 pm

Dan

Sent you PM about the TRD crank

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Sat May 04, 2013 7:40 am

kouki1986 wrote:Dan

Sent you PM about the TRD crank


responded....
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Jul 16, 2013 11:48 am

Bump.... with a few additions!



TRD piston sets 2 basic types available, standard pin location, and raised pin location (long rod applications) both have full skirts - $350 per set

Image



Once dressed up they look like this

Image



TRD rod sets - $350 per set

Image



Mahle type Atlantic pistons.....$400 per set

Image


MODIFIED TRD rods to fit the Mahle pistons - $400 per set (the small end of the rod is narrowed to fit inside the Mahle pistons tighter underside - see photo)

Image


email me if interested: oldeskewltoy@yahoo.com


:mrgreen:
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Mon Jul 29, 2013 8:12 pm

4AG Race Heads - 5 of them! [SIZE="5"]$800-$1400[/SIZE]


Full race ported 4AGE heads... these are REAL racing heads ported for producing power in excess of 220hp(the O/S valve heads)



Image

Image

Image

Image





send me an email oldeskewltoy@yahoo.com
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!