Formula Atlantic Race Shop Making Room
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Formula Atlantic Race Shop Making Room
Do I need to say whom?
Paypal + PP fees, if local... cash always works
As always... shipping is extra.
No checks, no credit cards
I'll put the dessert up first..... 5 Atlantic covers
The top 2 are newer style, they mount COPs: Silver color one is aluminum $400, the gold tone one that reads "dyno shop" is magnesium $600
The 3 along the bottom are the older style they use conventional type ignition wires. These sell for $350 each.
Now after dessert we have......???????????
some intake manifolds All of these are designed for a DCOE type carb/throttle body. $75-$100 EACH
#1 and #2($80 each) on the left are bare, or mostly bare castings... the bolt holes have yet to be drilled. They are UNIQUE in the 4AGE world....
As you can see, this caster thought of increasing the port speed by including a port divider in the manifold itself... Along with the divider, the casting was purposely made small so this could be ported for either largeport, or smallport use!!!
#3 and #4($80 each) above are full on race manifolds for largeport heads... you can see the raised roof of each port so the head can be ported to further raise the roof.
#5 and #6($75 each) above are also full on race manifold for largeport heads, but for non raised roof applications
#7 ($100) is a untouched smallport to DCOE intake
Happy bargain hunting... once something is sold... it is gone, so *IF* you really desire one of those cam covers... or one of the unique manifolds.... ALL for CHEAP... post up here or email me
oldeskewltoy AT yahoo.com
IF you are emailing me... PLEASE put the part you want in the subject line
Paypal + PP fees, if local... cash always works
As always... shipping is extra.
No checks, no credit cards
I'll put the dessert up first..... 5 Atlantic covers
The top 2 are newer style, they mount COPs: Silver color one is aluminum $400, the gold tone one that reads "dyno shop" is magnesium $600
The 3 along the bottom are the older style they use conventional type ignition wires. These sell for $350 each.
Now after dessert we have......???????????
some intake manifolds All of these are designed for a DCOE type carb/throttle body. $75-$100 EACH
#1 and #2($80 each) on the left are bare, or mostly bare castings... the bolt holes have yet to be drilled. They are UNIQUE in the 4AGE world....
As you can see, this caster thought of increasing the port speed by including a port divider in the manifold itself... Along with the divider, the casting was purposely made small so this could be ported for either largeport, or smallport use!!!
#3 and #4($80 each) above are full on race manifolds for largeport heads... you can see the raised roof of each port so the head can be ported to further raise the roof.
#5 and #6($75 each) above are also full on race manifold for largeport heads, but for non raised roof applications
#7 ($100) is a untouched smallport to DCOE intake
Happy bargain hunting... once something is sold... it is gone, so *IF* you really desire one of those cam covers... or one of the unique manifolds.... ALL for CHEAP... post up here or email me
oldeskewltoy AT yahoo.com
IF you are emailing me... PLEASE put the part you want in the subject line
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- speedmaster
- Club4AG Expert
- Posts: 234
- Joined: Tue Jan 22, 2013 9:44 pm
- Location: Malaysia and Brunei
- Contact:
Re: Formula Atlantic Race Shop Making Room
great stuffs!
Visit my FB fan page at https://www.facebook.com/speedmasteracing
Re: Formula Atlantic Race Shop Making Room
shyt! the good stuff always comes out when im broke... take payments on a 350 one, lol?
always looking to buy original ae86 master power window switches or parts, good or broken or not working.
look for my parts for sale...
rongfk1963@yahoo.com
look for my parts for sale...
rongfk1963@yahoo.com
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
speedmaster wrote:great stuffs!
thanks...
rongfk wrote:shyt! the good stuff always comes out when im broke... take payments on a 350 one, lol?
I wish I could, but the stuff isn't mine... first come, first served.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Formula Atlantic Race Shop Making Room
so tempted to use some of my refund on those valve covers............
'85 GT-S project since 2010
-
- Club4AG Regular
- Posts: 43
- Joined: Fri Jan 11, 2013 1:20 am
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
PM's answered....
Well... how about some TRD cranks!!! These are "only" $175 EACH All are damaged, but all can be repaired (at YOUR expense) OR just hung on the wall!!!!
Currently there is a guy on the east coast who has been buying these. Once repaired, they will work adequately, but RPM limits to 8000.
from another forum wrote:I just want those valvecovers to hang on my wall!
Well... how about some TRD cranks!!! These are "only" $175 EACH All are damaged, but all can be repaired (at YOUR expense) OR just hung on the wall!!!!
Currently there is a guy on the east coast who has been buying these. Once repaired, they will work adequately, but RPM limits to 8000.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Club4AG Enthusiast
- Posts: 82
- Joined: Thu Jan 10, 2013 3:47 am
Re: Formula Atlantic Race Shop Making Room
What kinda repair on the cranks and price avg?
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
wattsupbr86 wrote:What kinda repair on the cranks and price avg?
Some have bends, others have damaged journals, or cracks. Cost to repair are not included. You must find a shop who are capale to fix a crank
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Formula Atlantic Race Shop Making Room
hey bro i want to buy a formula atlantic valve cover text 818-877-6762
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
4aglife wrote:hey bro i want to buy a formula atlantic valve cover text 818-877-6762
Just send me an email....
I was PMed and asked what gaskets? There are no gaskets, it goes on with sealant.
Also why the shape is the way it is.... The shape is the way it is, because the cam covers/engine were a stressed component of the chassis. Here the upper part of the chassis tub is mounted to the cam covers
Also note that if you intend to use the F/A cover, you (or your machinist) will have to add 14 new holes in the head to accomodate the F/A mount style, also seen in the above photo.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Formula Atlantic Race Shop Making Room
How I wish I could afford this awesome stuff. Whatever you guys do just dont throw it away!
Re: Formula Atlantic Race Shop Making Room
No engine front covers by any chance? (you know, the one that replaces your stock oil pump)
Dry sump pump brackets for the exhaust side?
Dry sump pump brackets for the exhaust side?
Coffee is what makes civilized life possible in these demanding times...
-
- Club4AG Expert
- Posts: 423
- Joined: Thu Jan 10, 2013 10:08 pm
- Location: SF
Re: Formula Atlantic Race Shop Making Room
Nice to see these parts priced so aggressively. Great prices! Like Dan said, once these are gone, they're gone. The later style valve covers are now practically non-existant
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
Toyoloog wrote:No engine front covers by any chance? (you know, the one that replaces your stock oil pump)
Dry sump pump brackets for the exhaust side?
I'll check next week....
Thanks Billy... Yeah... most of this stuff has been up in Arnies attic for a few years now. I was tempted to buy the magnesium new one myself...
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Club4AG Pro
- Posts: 516
- Joined: Wed Jan 09, 2013 5:51 pm
- Location: PA
Re: Formula Atlantic Race Shop Making Room
Im interested in a front cover and sump bracket also......QRE has a brand new big port head sitting around in the shop all they did was change the rear cam caps to billet caps as they said those were the only ones that use to mess up...other then that the head is an untouched blank...
HKS use to make carb intakes like those split port ones pictured back in the day for the N2 series in japan...heres a few pics
HKS use to make carb intakes like those split port ones pictured back in the day for the N2 series in japan...heres a few pics
20v power.....powered by Orion's Demise!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
Gold, old style Atlantic cover is SOLD... it will be shipped to FRANCE next week...
Still both of the new style, and the 2 blue old style covers are available, get one before they are gone
Still both of the new style, and the 2 blue old style covers are available, get one before they are gone
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
The Aluminum (silver colored) new style Atlantic cover is now SOLD TOO......
Only 3 left!!! The magnesium new style, and the 2 Loyning blue old style...
You are not likely to see Atlantic covers this cheap anytime in the future........
Only 3 left!!! The magnesium new style, and the 2 Loyning blue old style...
You are not likely to see Atlantic covers this cheap anytime in the future........
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
oldeskewltoy wrote:Toyoloog wrote:No engine front covers by any chance? (you know, the one that replaces your stock oil pump)
Dry sump pump brackets for the exhaust side?
I'll check next week....
No exhaust side dry sump mounts of ANY kind... sorry...
BUT......... there are 2 billet front covers available... $400 per cover!!
A few more views of the manifolds... same order 1 on left, 7 on right
Now... back to the crankshafts....
Of the lot of 15 in the first photo, I decided NOT to sell 11 of them for use in an engine. This is because there are impact marks on the sides of the counterweights where rods, or other internals broke, and and impacted the side of a counter weight, OR SEVERELY toasted journals. These 11 are available for sale... but they are NOT RECOMMENDED by me to be used in an engine, they DO make nice sculptures
The light color one (kinda left-center of the crank photo pic) is a Roush crank, when new... $8500
So the bad news is there are 11 that can't be used.... that leaves 4 that CAN be used!!!
Of the 4, two are true TRD cranks still showing the TRD logo, one is a VERY early TRD crank, no TRD logo... but it does carry a TRD scribe marking, and what is left of a number - not sure what number it is... The other 2 "TRD" cranks are very similar forgings...
ALL of these cranks show minimum journal damage, but they all are re-useable! They will all need to be machined to use oversize bearings.
its best to email me if you want anything.. remember those manifolds are cheap... under $100 each
oldeskewltoy AT yahoo.com
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Club4AG Enthusiast
- Posts: 50
- Joined: Thu Jan 10, 2013 9:54 pm
- Contact:
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
808AE86inAZ wrote:PM'd
answered...........
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- Rogue-AE95
- Club4AG Expert
- Posts: 493
- Joined: Thu Jan 10, 2013 4:03 pm
- Location: Tampa Bay, FL
Re: Formula Atlantic Race Shop Making Room
Email sent... and I love the new avatar.
'88 Corolla All-Trac x2 (manual, auto)
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
Rogue-AE95 wrote:Email sent... and I love the new avatar.
Email responded... thank you on the avatar... it was a recent acquisition
I'm sorry... the bottom center - blue Atlantic cover is sold I'll update the photo tomorrow
.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
oldeskewltoy wrote: I'll update the photo tomorrow
.
3 down... 2 to go
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
Thank you Tony and Jessy... your Atlantic covers are in the mail, check your email for tracking information.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
from another forum wrote:Of the cranks left, do you feel they can be rev'd over 8000?
If so please send pics of the ones not dib'd yet and close up of damage if possible?
thx.
No one has dibs... money talks......
How far over 8000??
Of the 4 cranks that can be machined down and used... 3 show some kind of TRD markings
from another forum wrote:Of the cranks left, do you feel they can be rev'd over 8000?
If so please send pics of the ones not dib'd yet and close up of damage if possible?
thx.
oldeskewltoy wrote:
How far over 8000??
Available is a NOS (NEW, old stock) brand new(only out of its box for the pic!) TRD crank - $2000... that is about $1800 less then when Toyota sold it
Also available.... dry sump pans... priced as marked.
The dry sump pans are used, all come with a windage tray, some may need fittings - NOT supplied. The TRD pan on far right is cheaper because corner of mount part of pan is broken... this part of the pan (mount part) you would remove (have machined off) for use in anything using conventional engine mounts
Interested? Send me an email oldeskewltoy AT yahoo.com
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Formula Atlantic Race Shop Making Room
Email sent about the last Loyning's cam cover. If there is no damage to the casting, consider it sold.
Thanks!
Thanks!
EP(X) 82 -1987 Toyota Steam-Rolla GTS
2004, 2011, 2012 and 2013 SCCA EP National Champion
2003, 2011 and 2012 SCCA ProSolo Class Champion
Evolution Performance Driving School instructor
2004, 2011, 2012 and 2013 SCCA EP National Champion
2003, 2011 and 2012 SCCA ProSolo Class Champion
Evolution Performance Driving School instructor
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
scca01 wrote:Email sent about the last Loyning's cam cover. If there is no damage to the casting, consider it sold.
Thanks!
Responded
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Formula Atlantic Race Shop Making Room
If you can source one of those covers to conceal the COP wiring I'll take both the magnesium valvecover and a front engine cover.
Can you please give me a quote for shipping to the Netherlands as well?
Can you please give me a quote for shipping to the Netherlands as well?
Coffee is what makes civilized life possible in these demanding times...
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
Toyoloog wrote:If you can source one of those covers to conceal the COP wiring I'll take both the magnesium valvecover and a front engine cover.
Can you please give me a quote for shipping to the Netherlands as well?
I'll check on the COPs concealment cover when I go back tomorrow
One dry sump pan sold!
from another forum wrote:Machinable crank payment just paypalled.
received... before I ship it... would you like to save the freight cost and pick it up?? (purchaser is 100 miles from me) I could give you a 5 ¢ tour.....
I'll be going in tomorrow to pick up the best USED TRD labelled crank, and let the dry sump purchaser pick which pan he wants
I would offer the used cranks fully machined, but Loynings does not machine crankshafts. They have the equipment to polish, and balance a crank... but from their(Loynings) POV, if the crank needed turning, the client would buy a new crank.
With that said, I spoke to their "bottom end" guy, and we discussed the possibility that the rod journals COULD be cut down to 40mm and thus you could use this crank with small(early) rods...
That doesn't mean you MUST do it... BUT it is an option
EDIT:
Of the lot of 15 cranks... I managed to pull out 4 that SEEMED sales worthy..... well, after checking every journal for size, and each of the 4 cranks for cracks........
I will be selling only one The other 3 are either too far undersized, or cracked
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!