Formula Atlantic Race Shop Making Room

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Wed Feb 27, 2013 2:08 pm

oldeskewltoy wrote:
from another forum wrote:Fuel rail to suit the TRD throttles but with the injectors on-top.

Image



I'll ask..........



:D


I have managed to acquire a top feed fuel rail(w/ TRD cast into rail) and hardware - $125.00 plus freight

Image


.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu Feb 28, 2013 11:56 am

Image

One dry sump pan sold.. 5 currently left. I've had quite a few inquires on the TRD sumps... no buyers... yet.




EDIT: The 2nd to last olde style cam cover got shipped today... purchaser check your email for tracking information. I picked up the last olde style cover today, with luck I'll get it shipped in the next few days.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

delazy
Posts: 7
Joined: Thu Jan 10, 2013 10:36 pm

Re: Formula Atlantic Race Shop Making Room

Postby delazy » Fri Mar 01, 2013 8:22 pm

Don't suppose any TRD throttles laying around cheap? Or other cool stuff! Gantry injection? Carbon velocity stacks? Etc?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Sat Mar 02, 2013 10:07 am

delazy wrote:Don't suppose any TRD throttles laying around cheap? Or other cool stuff! Gantry injection? Carbon velocity stacks? Etc?


"cheap" is relative. Everything I've sold so far is VERY cheap... considering what these parts actual costs were/are.

I'm sure I can set you up with all kinds of fancy bits... like gantry injection, or barrel throttles... but this stuff is current, not 6-10 year old technology - so you are going to pay current kinds of prices.



The shown TRD fuel rail is sold...
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Mon Mar 04, 2013 11:35 am

from another forum wrote:I just checked my email and replied.


Greg, thank you for your reply... I picked up your crank this morning... with luck I should have it shipped by tomorrow.



The last old style cam cover got shipped this morning.... purchaser check your email for tracking


The TRD fuel rail w/hardware is sold... it is going to the land down unda.... :D I should be able to ship this out tomorrow as well.


oldeskewltoy wrote:
delazy wrote:Don't suppose any TRD throttles laying around cheap? Or other cool stuff! Gantry injection? Carbon velocity stacks? Etc?


"cheap" is relative. Everything I've sold so far is VERY cheap... considering what these parts actual costs were/are.

I'm sure I can set you up with all kinds of fancy bits... like gantry injection, or barrel throttles... but this stuff is current, not 6-10 year old technology - so you are going to pay current kinds of prices.



The shown TRD fuel rail is sold...





....... and I got what might be the ULTIMATE induction system for a largeport 4AGE....

:eek: I've managed to pry free a COMPLETE set of TRD throttles w/bottom mount injection!!!! Not only the throttles, but it also comes with the fuel rail, with the injectors, AND with the TPS... more or less plug and play....... $1400.00

Pictures to come shortly.....

Image

Image
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

KonaTrueno723
Club4AG Expert
Posts: 406
Joined: Mon Jan 21, 2013 5:02 pm
Location: 50th Northrop-Skylab-Lockheed MD/B 6891
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby KonaTrueno723 » Mon Mar 04, 2013 3:23 pm

Oldeskewltoy..wished i could borrow some money to buy that TRD throttle system :lol: such a beautiful piece!

You got incoming email sir..
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Mon Mar 04, 2013 5:54 pm

KonaTrueno723 wrote:Oldeskewltoy..wished i could borrow some money to buy that TRD throttle system :lol: such a beautiful piece!

You got incoming email sir..


Got your email... I'll get you an answer tomorrow... ok?



from another forum wrote:what size? and since injectors are on bottom, does the throttle plate open backwards?


What dimension would you like me to get for you??

Backwards isn't very clear... can you be more specific? I'll get a few more photos, I'll also try to look at how these throttles actuate... maybe get a photo so its clear
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

KonaTrueno723
Club4AG Expert
Posts: 406
Joined: Mon Jan 21, 2013 5:02 pm
Location: 50th Northrop-Skylab-Lockheed MD/B 6891
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby KonaTrueno723 » Mon Mar 04, 2013 6:52 pm

Alright thanks! Thought I'd get in on some of this stuff before they're gone :D
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega

User avatar
YoShImUrA
Club4AG Expert
Posts: 201
Joined: Wed Jan 09, 2013 5:33 pm
Location: Spain

Re: Formula Atlantic Race Shop Making Room

Postby YoShImUrA » Mon Mar 04, 2013 9:38 pm

Interesting parts, Dan!

When you say more or less plug and play, what mods do you need if you bolt it on a stock bluetop?


Thanks and GLWS!

User avatar
Toyoloog
Club4AG Enthusiast
Posts: 120
Joined: Mon Jan 14, 2013 10:20 pm

Re: Formula Atlantic Race Shop Making Room

Postby Toyoloog » Tue Mar 05, 2013 1:18 am

Any news on that COP cover plate? :D
Coffee is what makes civilized life possible in these demanding times...

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Mar 05, 2013 8:53 am

YoShImUrA wrote:Interesting parts, Dan!

When you say more or less plug and play, what mods do you need if you bolt it on a stock bluetop?


Thanks and GLWS!


don't....

These are HUGE... if you want ITBs on a stock bluetop, get a set of silvertop throttles, and one of the silvertop to 16V manifold adapters available on YJ....

These ITBs are for engines with aftermarket engine management(minimum), and (with the current injectors) a minimum of 280+ duration camshafts. A skilled tuner...using smaller injectors might be able to put these on a less radical engine...

Toyoloog wrote:Any news on that COP cover plate? :D


DOH.... :oops: forgot... I'll put it back into my book, and ask.... thank you for reminding me.... ;)
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Ultimx
Club4AG Enthusiast
Posts: 84
Joined: Thu Jan 10, 2013 10:46 pm

Re: Formula Atlantic Race Shop Making Room

Postby Ultimx » Tue Mar 05, 2013 9:16 am

Just out of curiosity, what size are thos itbs?

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Mar 05, 2013 10:13 am

Ultimx wrote:Just out of curiosity, what size are thos itbs?


I'll be getting that measurement later today.... along with the direction the throttles open toward.


The NOS crankshaft, the complete TRD pan, and a newer style Atlantic cover(blue "Loyning" one - photo I didn't get a chance to post) are now sold...


and heading to Finland!!!! :o
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Mar 05, 2013 12:40 pm

used crank purchaser, and the fuel rail purchaser (from Aussie) check your emails for tracking information.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Mar 05, 2013 1:19 pm

from another forum wrote:throttle plate size, sorry. (what is it)

I just remember reading something about if the injectors are installed on the bottom
you get better atomization when the throttle plate opens bottom out, not bottom in


:D

Image

As you made note of... the top of the throttle plates drop in, the bottoms go out...

Throttle diameter is 48mm
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Mar 05, 2013 1:28 pm

oldeskewltoy wrote:
Toyoloog wrote:Any news on that COP cover plate? :D


DOH.... :oops: forgot... I'll put it back into my book, and ask.... thank you for reminding me.... ;)


$300.00 - There is some minor damage (red arrows), also the decals are fading a bit....

Image
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

KonaTrueno723
Club4AG Expert
Posts: 406
Joined: Mon Jan 21, 2013 5:02 pm
Location: 50th Northrop-Skylab-Lockheed MD/B 6891
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby KonaTrueno723 » Tue Mar 05, 2013 8:04 pm

Payment sent!
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Mar 05, 2013 8:55 pm

KonaTrueno723 wrote:Payment sent!

received...
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

KonaTrueno723
Club4AG Expert
Posts: 406
Joined: Mon Jan 21, 2013 5:02 pm
Location: 50th Northrop-Skylab-Lockheed MD/B 6891
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby KonaTrueno723 » Tue Mar 05, 2013 9:43 pm

Thanks oldeskewltoy.. I may grab up that 2nd one here very shortly so I'll let you know by the end of the week!
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Wed Mar 06, 2013 4:02 pm

The new TRD crank is sold

Image


So is the complete TRD dry sump pan

Image


as well as #6 intake manifold

Image



I've had a few nibbles :D on the throttles... they are still available :eek:
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

Tang88
Posts: 9
Joined: Mon Feb 18, 2013 6:18 pm

Re: Formula Atlantic Race Shop Making Room

Postby Tang88 » Thu Mar 07, 2013 8:17 am

Ahhh I know I'll kick myself in the future on that new Trd crank..I let slip by...

User avatar
drift0nedge
Club4AG Regular
Posts: 11
Joined: Sun Feb 10, 2013 10:19 am

Re: Formula Atlantic Race Shop Making Room

Postby drift0nedge » Fri Mar 08, 2013 3:52 pm

Raw cover+manifold #4 total cost shipped to 92571 please. driftonedge@gmail.com
Image

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Fri Mar 08, 2013 4:19 pm

drift0nedge wrote:Raw cover+manifold #4 total cost shipped to 92571 please. driftonedge@gmail.com


Gary, check your email... I responded on March 6th... but in case of email snafu... I re-sent the same response. I had a question for you...I'm not sure what you want when you saw "raw cover"? I assume you mean the TRD cover and said so in my email, but if I'm wrong, please correct me.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Thu Mar 14, 2013 10:09 am

Bump....

My computer crashed a couple of days ago... with luck I should get all my files back... but until I'm back up and running, I'm doing the best I can with my phone, and docking station. What that means is I can't update, or add photos.... until I'm back up.


With that said, it doesn't mean parts aren't still for sale, and more coming soon :o

In the mean time.. I want to sell those COMPLETE TRD throttles.....

I'll take the FIRST offer over $1000.00 (+ PP fees and shipping).

That is a immediate $300 savings :!: If they don't go @ $1000, they'll get wrapped up and back in storage

send me an email... oldeskewltoy AT yahoo.com, first email gets dibs....
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

sekang0
Club4AG Expert
Posts: 202
Joined: Fri Jan 11, 2013 7:46 pm
Location: Stockton, CA

Re: Formula Atlantic Race Shop Making Room

Postby sekang0 » Thu Mar 14, 2013 11:05 am

Wish u had another NOS crank.. :(
'85 GT-S project since 2010
Image

KonaTrueno723
Club4AG Expert
Posts: 406
Joined: Mon Jan 21, 2013 5:02 pm
Location: 50th Northrop-Skylab-Lockheed MD/B 6891
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby KonaTrueno723 » Fri Mar 15, 2013 4:28 pm

Oldeskewltoy..I got the info you sent me. Thanks for all your help! Hope it all works out with your issue..
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega

KonaTrueno723
Club4AG Expert
Posts: 406
Joined: Mon Jan 21, 2013 5:02 pm
Location: 50th Northrop-Skylab-Lockheed MD/B 6891
Contact:

Re: Formula Atlantic Race Shop Making Room

Postby KonaTrueno723 » Mon Mar 18, 2013 10:26 pm

Got it in the mail today, looks awesome! Thnk u! :D
________________________________________________________________________________
Speed doesn't kill, its the sudden stop.
Toy House Automotive & Engineering
87 GTS Coupe
85 Toyota Truck V-8 Matching Trailer
72 Blown 6-71 Pro Street Vega

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Tue Mar 19, 2013 5:54 pm

Bump....

Image

Another DCOE manifold has gotten snatched up... this time #7(far right)... the raw smallport unit. It is going to New Zealand :eek:


sekang0 check your PM...
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!

levin_GTZ
Posts: 4
Joined: Fri Jan 11, 2013 10:37 pm

Re: Formula Atlantic Race Shop Making Room

Postby levin_GTZ » Tue Mar 19, 2013 7:40 pm

Are you willing to ship to canada ? I will problably take one of those trd crank

User avatar
oldeskewltoy
Club4AG MASTER
Posts: 2180
Joined: Wed Jan 09, 2013 4:44 pm
Location: Portland, Oregon

Re: Formula Atlantic Race Shop Making Room

Postby oldeskewltoy » Wed Mar 20, 2013 8:39 am

levin_GTZ wrote:Are you willing to ship to canada ? I will problably take one of those trd crank


Canada isn't too tough.... I'll ship where ever a customer is... as long as I can legally ship to him/her(sorry Jung Ill whatever your name is - Korean dictator) and he/she covers all costs, duties, and taxes.
OST Cyl head porting, - viewtopic.php?f=22&t=300

Building a great engine takes knowing the end... before you begin :ugeek:

Enjoy Life... its the only one you get!