Formula Atlantic Race Shop Making Room
-
- Club4AG Enthusiast
- Posts: 113
- Joined: Sun Apr 07, 2013 2:48 am
Re: Formula Atlantic Race Shop Making Room
I know I'm a little slow, but is there any of the rod sets left? And are they the FA rods to suit 19mm pins or 20mm?
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
Jimmee1990 wrote:I know I'm a little slow, but is there any of the rod sets left? And are they the FA rods to suit 19mm pins or 20mm?
i still have rod sets, they are for 19mm pins. $350 per set is exceptionally priced
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Formula Atlantic Race Shop Making Room
Do you have exhaust manifold available for sale?
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
7_sxe10 wrote:Do you have exhaust manifold available for sale?
like any headers?? None I know of...
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
bump......
One head pending...........
2 sets of rods sold.......
One head pending...........
2 sets of rods sold.......
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Formula Atlantic Race Shop Making Room
do you have any rod sets left?
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
oldeskewltoy wrote:bump......
One head pending...........
2 sets of rods sold.......
Rod Purchaser wrote:Just for your interest, I have resized both ends of the rods and there is heaps of metal around the small end for a 20mm pin and standard 20mm 4A-GE pin bushes if anyone else asks.
So a set of these rods can be modified to accept 20mm wrist pins
I still have rods...
The Atlantic heads... make an offer... OH... the one on top in the center is sold
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
BIG clearance....
ALL used long rod pistons (designed to fit long connecting rods{127.5mm instead of 122mm}) $150 per set of 4.
DON'T ask... I don't have ANY long rods.... that is why the CHEAP sale. So if you have a set of long 4AGE rods... I have CHEAP TRD Type pistons available
That is a set of 4 pistons for $150.00
ALL used long rod pistons (designed to fit long connecting rods{127.5mm instead of 122mm}) $150 per set of 4.
DON'T ask... I don't have ANY long rods.... that is why the CHEAP sale. So if you have a set of long 4AGE rods... I have CHEAP TRD Type pistons available
That is a set of 4 pistons for $150.00
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Posts: 2
- Joined: Sat Nov 02, 2013 5:38 pm
Re: Formula Atlantic Race Shop Making Room
Do you still have a set of TRD Carillo rods for sale
let me know
thanks
Bob
let me know
thanks
Bob
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
Brooklandsbob wrote:Do you still have a set of TRD Carillo rods for sale
let me know
thanks
Bob
I have plenty of TRD rods available, $350 per set.... There isn't a Carrillo marking on them....
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Posts: 2
- Joined: Sat Nov 02, 2013 5:38 pm
Re: Formula Atlantic Race Shop Making Room
Any idea of the hours run on any of these, are these usable as is or do they need work before use.
thanks
thanks
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
Brooklandsbob wrote:Any idea of the hours run on any of these, are these usable as is or do they need work before use.
thanks
The rods vary. Some folks have run then the way they are, others have rebushed them, and one person went and purchased all new L-19 bolts. The bolts they come with are not L19 type, but regular Carrillo type bolts
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Club4AG Enthusiast
- Posts: 141
- Joined: Thu Jan 10, 2013 10:37 pm
Re: Formula Atlantic Race Shop Making Room
Please let me know if you guys ever get anymore valve covers like what you were selling... Janmartin.villanos at yahoo com since i dont always check the forums
Re: Formula Atlantic Race Shop Making Room
Hello oldeskewltoy
I sent you an Email
Thanks
I sent you an Email
Thanks
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
sgonzalez wrote:Hello oldeskewltoy
I sent you an Email
Thanks
replied.......
Unless things change....... all the carb type intake manifolds are sold.
There is/are an intake manifolds available (about $375) for the largeport - 99003.840. For the smallport 99003.841
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Club4AG Expert
- Posts: 454
- Joined: Mon Jan 14, 2013 9:20 pm
Re: Formula Atlantic Race Shop Making Room
I think I have a set of 5.5mm Long Carrillo rod for the piston you selling.
Stock size is 122mm C to C
The rods I have is 127.5mm C to C.
It is almost brand new!
was $1500 In new.
I am willing to sell it for $800 a set
I can Text you the photo!
Contact me at 310.254.680three.
Stock size is 122mm C to C
The rods I have is 127.5mm C to C.
It is almost brand new!
was $1500 In new.
I am willing to sell it for $800 a set
I can Text you the photo!
Contact me at 310.254.680three.
Last edited by Orange Rocket on Tue Feb 11, 2014 9:42 am, edited 4 times in total.
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
Orange Rocket wrote:I think I have a set of 5.5mm Long Carrillo rod for the piston you seeling.
Stock size is 122mm C to C
The rods I have is 127.5mm C to C.
It is almost brand new!
was $1500 In Brand new.
I am willing to sell for $800 a sets
I can Text you the photo!
Contact me at 310.254.680three.
I have pistons that will work both sides of that...(5.461mm, or 5.588mm) Would you like to buy a set... or more if you have more long rod sets? Since my pistons are less costly then your rods... it would make a little more sense for you to put sets together... $150.00 is a GREAT price for 4 pistons.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Club4AG Expert
- Posts: 454
- Joined: Mon Jan 14, 2013 9:20 pm
Re: Formula Atlantic Race Shop Making Room
I had 4 sets of this rods, but 3 of them sold to Japan with my 83mm custom piston for 4.5AG and 5.5AG set up.
So only one set left for my future 5.5AG set up.
But I have too many race engine for one race car.
Just want to sell my rods if someone interested at this point.
otherwise keep it and use it with New 83mm custom piston for my 5AG crank
Thanks!
So only one set left for my future 5.5AG set up.
But I have too many race engine for one race car.
Just want to sell my rods if someone interested at this point.
otherwise keep it and use it with New 83mm custom piston for my 5AG crank
Thanks!
oldeskewltoy wrote:Orange Rocket wrote:I think I have a set of 5.5mm Long Carrillo rod for the piston you seeling.
Stock size is 122mm C to C
The rods I have is 127.5mm C to C.
It is almost brand new!
was $1500 In Brand new.
I am willing to sell for $800 a sets
I can Text you the photo!
Contact me at 310.254.680three.
I have pistons that will work both sides of that...(5.461mm, or 5.588mm) Would you like to buy a set... or more if you have more long rod sets? Since my pistons are less costly then your rods... it would make a little more sense for you to put sets together... $150.00 is a GREAT price for 4 pistons.
- speedmaster
- Club4AG Expert
- Posts: 234
- Joined: Tue Jan 22, 2013 9:44 pm
- Location: Malaysia and Brunei
- Contact:
Re: Formula Atlantic Race Shop Making Room
can FA head fit in FWD 4age block?
Visit my FB fan page at https://www.facebook.com/speedmasteracing
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
speedmaster wrote:can FA head fit in FWD 4age block?
You mean one of these....
oldeskewltoy wrote:4AG Race Heads - 5 of them! $800-$1400
Full race ported 4AGE heads... these are REAL racing heads ported for producing power in excess of 220hp(the O/S valve heads)
send me an email oldeskewltoy@yahoo.com
They can fit on ANY "A" block.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
-
- Club4AG Regular
- Posts: 10
- Joined: Wed Feb 12, 2014 2:00 pm
Re: Formula Atlantic Race Shop Making Room
do you still have the #7 intake for a small port? pls email me at migz299@yahoo.com
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
toyproject83 wrote:do you still have the #7 intake for a small port? pls email me at migz299@yahoo.com
sorry... all the DCOE manifolds are sold.
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- speedmaster
- Club4AG Expert
- Posts: 234
- Joined: Tue Jan 22, 2013 9:44 pm
- Location: Malaysia and Brunei
- Contact:
Re: Formula Atlantic Race Shop Making Room
ok thats cool knowing it can fir a FWD engine
Visit my FB fan page at https://www.facebook.com/speedmasteracing
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
- pauledlinatlantic86
- Club4AG Regular
- Posts: 16
- Joined: Sat Jun 07, 2014 6:40 pm
- Location: New Zealand
- Contact:
Re: Formula Atlantic Race Shop Making Room
hi there. i see this post is old but im after a 16v atlantic cam cover. do you have anymore for sale???????
- oldeskewltoy
- Club4AG MASTER
- Posts: 2184
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: Formula Atlantic Race Shop Making Room
pauledlinatlantic86 wrote:hi there. i see this post is old but im after a 16v atlantic cam cover. do you have anymore for sale???????
nope... I've had a LOT of people ask...
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: Formula Atlantic Race Shop Making Room
Just curious if you still have a stock of TRD connecting rods, and if you do, are they set up for a 20mm wrist pin?
-
- Club4AG Expert
- Posts: 454
- Joined: Mon Jan 14, 2013 9:20 pm
Re: Formula Atlantic Race Shop Making Room
l2dracing wrote:Just curious if you still have a stock of TRD connecting rods, and if you do, are they set up for a 20mm wrist pin?
Atlantic use 19mm pin