4age big port long block and t50
Posted: Sat Aug 31, 2013 12:49 pm
Selling my complete long block and t50 trans. Trans has a good clutch and flywheel is also good ( ideally they'd be replaced before fitting ) but they're good none the less.
Trans has a very slight intermittent grind when going to 2nd gear. Drove over 20k with it and the engine, faultless every day.
Engine has powder coated valve covers and burns a little oil on overrun. Again, faultless over 20k. Had 142k when removed.
* Asking $500 for the engine. ( comes as pictures but does not come with harness or some sensors )
* Asking $250 for the transmission ( no bell housing )
Open to REASONABLE offers.



Trans has a very slight intermittent grind when going to 2nd gear. Drove over 20k with it and the engine, faultless every day.
Engine has powder coated valve covers and burns a little oil on overrun. Again, faultless over 20k. Had 142k when removed.
* Asking $500 for the engine. ( comes as pictures but does not come with harness or some sensors )
* Asking $250 for the transmission ( no bell housing )
Open to REASONABLE offers.


