I'm making BRZ front license plate brackets to order
Posted: Wed Jan 16, 2013 6:02 pm
I will be manufacturing a license plate bracket for the new BRZ on a basis that if you want one, it will take a week to make, currently the prototye is set, and on a friends BRZ, perfect fitment. Heres a few pics for reference, much nicer than the Perrin, Cusco, or Grimmspeed i found on the net.
It utilizes 2 bolt holes already on the car, so no cutting or drilling needed.
the bracket will be made out of 1/8" x 1" steel flat stock, painted black.
If you want one, a non-refundable(as in you decide later you don't want it) deposit of $10 via PayPal is required. It will be $30 total, shipped with tracking. Subtract the deposit from that obviously.
An FRS one could be made BUT I need a test vehicle in north NJ. You provide the vehicle, and get a free bracket for your time.
morgan
It utilizes 2 bolt holes already on the car, so no cutting or drilling needed.
the bracket will be made out of 1/8" x 1" steel flat stock, painted black.
If you want one, a non-refundable(as in you decide later you don't want it) deposit of $10 via PayPal is required. It will be $30 total, shipped with tracking. Subtract the deposit from that obviously.
An FRS one could be made BUT I need a test vehicle in north NJ. You provide the vehicle, and get a free bracket for your time.
morgan