new 50mm AE86/TE72 RCA's + steering rack spacers

[87_Corolla]

I have a few pairs of 50mm RCA's I have made to sell. These are dope, 50mm thick for today's ride height. CNC'd from 6061 aluminum with steel insert pins. These kits will come with all bolts and washers needed for proper install. They fit AE86/TE72. You can even run certain 13" wheels with them. If you have modded knuckles or wheels with a LOT of backspacing (look it up if you don't know the difference between offset) you might need to run a spacer. To give an idea 14" supras fit fine with stock ps knuckles.

I only have 4 pairs of purple and 2 pairs of each, black, blue, and silver left

FYI T3's are 38mm as well as most other RCA's

$120 per kit + shipping.
Shipping to most of the USA about $20 for one pair of RCA's


Can combine shipping for actual cost.








I have a bunch of AE86/AW11 manual rack and zenki steering rack spacers. These are made from a pretty high performance steel called 4140 HTSR, really good stuff. My spacers have long thread engagement, wrenching flats, and super awesome chamfers. One kit comes with one thread on spacer and one slip on spacer, they will run you $85 shipped These give lots of extra rack travel and angle gains.






Also for any rack I have pairs of slip on steering spacers for noticeable but milder angle gains. They are pretty much glorified washers, but when you get down to it you avoid all the stupid BS of stacking washers. Oh wait you can buy washers for $0.20.........huuummm well the outside diameter will be way bigger then the rack and buy the time you file them down to a usable diameter it will be next Sunday and you still have a pile of dog ****. One pair = one kit will run you $15 SHIPPED!!!!!!!!!!!!!!!!



Payment can be made via pay pal

contact Japanese.tail.lights@gmail.com

[87_Corolla]

Black is now sold out, purple is right behind.