• carbon fiber gauge panel / door panels

Posted: **Wed Jun 26, 2013 12:35 am**

NO LONGER FOR SALE

Posted: **Wed Jun 26, 2013 1:54 pm**

OMG this is PERFECT!!! - its been a REALLy long time since someone offered these plates..

if people are running after market gauges, mite as well use this and ditch the old rott gauge cluster.

do these fit inside the stock housing? and clip in perfectly? it looks like its shaped perfectly for it to just snap in.. all the user needs is to just cut out the shape of their gauges / cluster. Can still retain the stock housing..

is that also DRY carbon!?

NOT BAD~!

Posted: **Wed Jun 26, 2013 6:05 pm**

I'm in for one. Text me 423-838-0102 and remind me on Friday (payday) cuz I'll totally forget lol.

Posted: **Wed Jun 26, 2013 9:58 pm**

I'm down for one as well. Where are you located .

Posted: **Thu Jun 27, 2013 7:08 am**

I'm in!

Posted: **Thu Jun 27, 2013 10:03 am**

ronny -
yes, these fit inside the stock housing and snaps right in. these panels are hand layed and then compressed. the panels offered are in a semi gloss finish - the panel pictured with the defi gauges is a matte finish, i can have these panels available in a matte finish for an extra charge.

carbd7age -
sounds good.

eightysixer23 -
im located in orange county, ca - im usually in the anaheim, orange and tustin area.

Posted: **Wed Jul 03, 2013 2:10 pm**

Do you have plenty in stock

Posted: **Fri Jul 05, 2013 7:41 am**

interested in these...still available?

Posted: **Fri Jul 05, 2013 9:21 pm**

i have a couple available

Posted: **Sat Jul 06, 2013 9:05 am**

How much extra for the matte finish? Any wait time?

Posted: **Mon Jul 08, 2013 10:21 am**

i can have the panel available in a matte finish for 90 picked up or 95 shipped, no wait time.

Posted: **Mon Jul 08, 2013 12:09 pm**

Still have any left? Im in as well

Posted: **Sun Jul 14, 2013 12:45 pm**

do you have anymore??? i want one!

Posted: **Mon Jul 15, 2013 11:23 am**

yes, i still have a couple available.

Posted: **Mon Jul 15, 2013 9:24 pm**

Got mine **** is sick!!!

Posted: **Wed Jul 17, 2013 1:04 pm**

Just got mine and already test fitted. Fitment is perfect and snug. Very sturdy as well.

Posted: **Sun Jul 21, 2013 6:28 pm**

what was used to cut the holes out so that this plate doenst crack when we decided to cut the holes out for our needs

vuh wrote:hi guys,

i just wanted to give you all a brief introduction... i work for a carbon fiber composite manufacturing company producing parts for lamborghini, ferrari, audi, porsche, etc. my good friend introduced me to the corolla and ive been slowly building my project car. as i build my corolla and make parts for the car i will introduce them to the corolla community so that there are more parts / options for you guys. we use high quality raw materials (carbon, gel coat, resin, epoxy, etc.) and everything is made in-house in orange county, ca. i am only doing this afterhours on my free time.

for those running aftermarket gauges / cluster (defi, trd, stack, aim, s2000, etc.) ive made a blank 2x2 twill carbon fiber panel so that you can cut out whatever shape you need to accommodate your aftermarket setup.

im offering these for $85 shipped or $80 picked up.

set up with defi gauges

please pm me if youre interested. thank you!

-vu

Posted: **Mon Jul 22, 2013 9:01 am**

Picked up mine last night. Looks good! I can't wait till the rest of my gauges are here.

Posted: **Tue Jul 23, 2013 1:18 pm**

ae86luis wrote:what was used to cut the holes out so that this plate doenst crack when we decided to cut the holes out for our needs

The seller recommend using a hole saw/drill for circular holes, and a drill, jig saw, dremel, etc. for other shapes. Sand edges after cutting/drilling. Obviously use common sense when cutting/drilling to not damage the panel.

So far I've done a rectangular cutout for the stock fuel gauge using a dremel with standard small cutoff wheels (I broke a few in the process). It cut through the panel like butter, but a lot of patience and a steady hand is needed since it's all done by hand.

Posted: **Mon Sep 02, 2013 1:40 am**

i still have a couple of these gauge panels left for those interested.

Posted: **Fri Sep 13, 2013 11:38 pm**

updated, items shipped. pm's replied - i have 3 left if anyone else is interested.

Posted: **Sat Oct 05, 2013 12:56 am**

updated - door panels.

Posted: **Sun Oct 06, 2013 9:07 pm**

Interested in carbon fiber rear panels in 1k weave please!

Posted: **Wed Oct 16, 2013 8:05 am**

Sent you a pm

Posted: **Wed Jan 08, 2014 10:15 pm**

pm's replied. thank you!

Posted: **Wed Jan 08, 2014 10:32 pm**

Hmmmm i really like this will pm you tomorrow!!!! Funds ready

Posted: **Thu Jan 23, 2014 4:51 am**

Are you shipping these internationally? I'm willing to pay for shipping

carbon fiber gauge panel / door panels

carbon fiber gauge panel / door panels

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel

Re: carbon fiber gauge panel / door panels

Re: carbon fiber gauge panel / door panels

Re: carbon fiber gauge panel / door panels

Re: carbon fiber gauge panel / door panels

Re: carbon fiber gauge panel / door panels

Re: carbon fiber gauge panel / door panels