Fisher Fury Project for sale - 4AGZE

[TheDingo8mybaby]

**EDIT: Looks like it's sold

I want to buy this so badly, but I already have a british car project and no space in the garage

No affiliation and usual disclaimers... Contact info found here: http://usa7s.com/vb/showthread.php?t=10011



For sale: Fisher Fury project. Full-bodied, sevenesque kit from the UK (http://www.furysportscars.co.uk) that is close to final completion. Based on the incomparable Sylva Striker, this Jeremy Phillips design would make a fine racer and/or very sporty road car and features a light, rigid steel tube chassis reinforced by aluminum panels under a strong yet lightweight fiberglass body.

The chassis uses primarily English Ford Escort Mk II donor components including an Escort Mk II live axle (4.12 with Quaife ATB differential and alloy diff. carrier) and front uprights and a "quick" steering rack (2.2 ratio) as well as SPAX coilovers at all 4 corners. Brakes are Wilwood Dynalites over drilled rotors all around with mechanical parking brake and a Tilton pedal assembly. Kumho Victoracers (205/50-15) roll on 15x7 Panasport Ultralights.

The engine is a supercharged Toyota 4A-GZE 1.6L featuring oversized TRD valves and headwork from Port Flow Design, Cusco crank pulley for 14 psi boost, Web 101 cams, Wiseco forged pistons, TRD main bearing caps, ARP fasteners, large custom air-air intercooler, custom exhaust header, and SDS-EFI programmable fuel injection and ignition. Transmission is a built Toyota T-50 5 speed with TRD close-ratio gears and TRD quick shifter behind a lightweight flywheel and ACT clutch. Sump is a nice winged cast alloy unit from a PRB Clubman. A custom fuel cell from Fuel Safe holds the gas.

The fiberglass body has the 'Classic' Fury bonnet with doors and detachable sidescreens and includes both a soft AND hardtop and windshield and hardtop rear glass as well as a braced roll bar. A full Autometer Ultralight gauge package, heater, wipers, leather RX777 seats, complete carpet and trim package, all lights and switches are included.

What's left to be done? A coolant expansion tank (included) to be spliced into the cooling system, gauge installation and switch/light wiring, carpet and interior trim, and final bodywork and paint.

Why haven't I finished it? Demanding job, new interests, moving soon. Life intercedes!

Price: $7500 inclusive.

https://www.flickr.com/photos/23554907@ ... 966293857/

[previadrifter]

Is this car in the US?

[TheDingo8mybaby]

Is this car in the US?

Yes - Massachusetts (according to the seller's location in the original ad)