Hello,

I made a huge mistake long store short because I was away and my father was helping with my car while order parts and even took my open diff to a shop and have my Cusco RS LSD installed so when I came back all of it would be ready to be put back together. He is a bit older and some how I have Kouki Axles. My LSD is completely done already (very expensive work obviously). I had already put new bearings on the Kouki axles too which sucks, but the easiest fix is to get a pair of Zenki Axles open or LSD doesn't matter can always cut the 5-8mm from the open diff axles.

PLEASE PLEASE PLEASE can someone help! Really need a pair of Zenki Axles!

Reply, PM, or email. I can send PayPal and willing to pay for shipping to NC 27909.

Hi, so you need Zenki axels right? Instead of Kouki? So the Kouki was already cut for LSD pumkin right? I got Zenki open axels do. Just text me @909-641-8395. And we can talk about it.

As far as I know you can cut the zenki axles only if you're using oem zenki lsd or trd only. If you're using aftermarket like cusco, you need to use lsd specific axles. Ask around first before you waste you're $ on open zenki axles.

Just text me @9096418395. And we can trade your Kouki axels to my Zenki axels.

BBoy34, thanks for the reply but that doesn't make much sense. Using fake numbers, lets say LSD axles are 300mm long, and open diff are 315mm long, cutting 15mm would make the open diff axles the same length as the LSD axles. I don't see why an aftermarket LSD would even notice the difference? If the LSD vs Open were a different diameter that might be a problem, but their same diameter. They also have the same number of spins.

Maybe if you have a chance can pass some reference or examples of this issue.

Peanut,

I'll message you in a bit, I don't mind trading, but I would appreciate we talk first because I just put brand new bearings on both axles, haven't been driven a single mile yet. I have the receipts as well to prove.

I'll send you a PM later so we can talk discuss!

Peanut,

Just had a chat with my brother and he recommend something. Few years ago on this forum he had an issue with a trade that went bad. So he recommend that we both mail each other 1 axle including tracking number. Once we both have received the axle then we send the second axle.

Normally we would be able to use PayPal or Visa to cover if a item doesn't get shipping and get a refund, but trading there is a lot of trust, not that either of us are bad people, but I think that is the safest approach. Because we only have 1 axle we know that the person will ship the second axle because both of us cant do anything with 1 of each axle!

Its a win/win and a safe way to trade, but it does require a bit more effort on our parts to ship the axles individually.

Please let me know if your ok with this method that will protect both of us? If you need the axles ASAP we can do next day or two day, etc.

Don't worry I'm 100% liget. I sell and trade my parts every were in the USA. And I buy parts too out state. Also sell parts in Craigslist. I just text you while ago.

Sorry for the confusion vas, I switched them around oem or trd lsd you have to cut but if using cusco no need to cut open axles. Just need specific kouki or zenki lsd/axles.

Peanut793 wrote:Don't worry I'm 100% liget. I sell and trade my parts every were in the USA. And I buy parts too out state. Also sell parts in Craigslist. I just text you while ago.

Peanut 793,
is legit I bought an LSD with Third Member here on Club4ag a couple weeks ago he's a great Seller and very good communication. Ships fast too with tracking number. Just my opinion, I was skeptical at first but he was honest and straight forward in the end.

I have a pair of zenki lsd axles for sale if someone is interested.