Page 1 of 1
new fuel line needed for 20v blacktop
Posted: Thu Mar 14, 2013 4:42 am
by phanist
hi guy!!!
im looking for a fuel line that run from my stock ae86 fuel filter to my 20v blacktop.. any one know where i can find one. thank
Re: new fuel line needed for 20v blacktop
Posted: Thu Mar 14, 2013 9:10 am
by gaijin_rokurunner
i have one i believe i will take a picture and post it in a few hours u tell me if its what u need
Re: new fuel line needed for 20v blacktop
Posted: Thu Mar 14, 2013 9:52 am
by ga_goosh
phanist wrote:hi guy!!!
im looking for a fuel line that run from my stock ae86 fuel filter to my 20v blacktop.. any one know where i can find one. thank
I saw this from another forum but the info came fron the old c4ag site.
http://www.86garage.com/forums/viewtopic.php?f=24&t=3048pecx wrote:Found it from club4ag posted by jdmflavor510
To often do i see posts asking for what parts are need for making a stainless steal braided lines from the fuel filter to the fuel rail,well here it goes:
Earls part number
991945ERL qty2
Aeroquip part numbers
FCM4032 qty2
With these part numbers you will also 2.5 feet of Stainless steal braided lines
stainless steal braided line qty 2.5 in -6. I bought 3 feet which was way to long i think 2.5 should be enough.
here are pics as well
Re: new fuel line needed for 20v blacktop
Posted: Thu Mar 14, 2013 11:45 am
by LongGrain
if anyone wants to do a stainless feed line from the filter and keep the stock banjo bolt. I have a banjo to male -6 AN fitting for doing just that. Fitting was expensive and hard to find, and now I dont need it.
Re: new fuel line needed for 20v blacktop
Posted: Sun Mar 17, 2013 3:55 am
by phanist
yah i think that what i needed.. thank every much all
Gaijin
you have one>? can please show me what u have? thank