Hi ya'll, I have a ZENKI HATCH project and I'm looking for the following parts in WORKING condition:

Plastic radio shroud (NOT cut, black)
Clock bezel (dark blue)
Front fender liner (both sides or just the front left)

I will continually update this post when I find more things I need.
Shipping will be to 01826 Let me know.
PM or email welcome: maxmorin@comcast.net

Thanks

- Max

I've got the power mirror switch. $12 shipped. Shown near the center in the below pic:

Deuce Cam wrote:I've got the power mirror switch. $12 shipped. Shown near the center in the below pic:

Does it come with the connector attached? I need to be able to plug it straight in, no wiring involved.

- Max

Yes, this switch is plug'n'play as long as your harness is equipped for power mirrors and has the pigtail that plugs into the switch.

Deuce Cam wrote:Yes, this switch is plug'n'play as long as your harness is equipped for power mirrors and has the pigtail that plugs into the switch.

Great, my car is equipped, just missing that switch. Shoot me a PM

- Max

I have the driver side mirror (power), it shakes a lot on the freeway(prolly bolts need to be tightend) and the motor inside is reversed. It still goes up and down, left and right are reversed.

EJ86 wrote:I have the driver side mirror (power), it shakes a lot on the freeway(prolly bolts need to be tightend) and the motor inside is reversed. It still goes up and down, left and right are reversed.

I'm mainly looking for the actual mirror material, my unit works fine to my knowledge. Sorry about that :/

- Max

PMed...