Heat the lens up in the oven at warm, or 200 or below. for about 8 min watch to make sure they dont melt. carfully pull them apart with out cracking the lens. take your time these break fairly easy.
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LED%20tail%20light%20final%20version%20001_zps8637d33d.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LED%20tail%20light%20final%20version%20002_zps352e0b2b.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LED%20tail%20light%20final%20version%20003_zps7761398a.jpg)
disassemble lights
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LED%20tail%20light%20final%20version%20004_zpscadf7cd5.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LED%20tail%20light%20final%20version%20005_zpsc0b0199b.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LED%20tail%20light%20final%20version%20006_zpsc510791f.jpg)
Mounted the LED panels, and polyseam selled them in.
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightfinished001_zpscca40cb7.jpg)
LED panels on, u can see it needs a full 12v not a tinny 9v powering all 4! so it will be crazy bright in the car!
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightonly3LEDs003_zps8486c387.jpg)
lights on
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightfinished002_zps954deef9.jpg)
lights off
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightfinished003_zps10e0dc4c.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightfinished004_zps33071e75.jpg)
Or should I just have 3 lights and a reverse?
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightonly3LEDs001_zps697c6be3.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightonly3LEDs002_zpsd98b1a84.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightstesting010_zpscbafc0b5.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightstesting009_zpsd779be5c.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightstesting007_zpsac4ceae4.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightstesting006_zpse36a7a7f.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightstesting005_zpsc69da0c6.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightstesting004_zps9e2ad64d.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightstesting003_zps6f388b98.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightstesting001_zpsdef5ceec.jpg)
![Image](http://i48.photobucket.com/albums/f231/marley4us/project%20ae86/LEDtaillightstesting002_zps16daef4a.jpg)
you can wire them in anyway you want, to have a few lights light up as brake lights or all, and use ressistors to make it brighter or dimmer for running lights