So as for these types of hood scoops I've always liked the styling of them. I've also always wanted to put one on my car, but reading different things about how the fiberglass ones crack its always held me back on doing it. Lately I made a splitter for the car and am actually leaning towards something that would give the front of the car more of a bias (making it bulky) I also have two daily drivers now and am thinking of adding more things to the ae92 to eventually bring it from street/track to pure track. The change isn't something that's gonna happen anytime too soon, it's gonna cost quite a bit, plans might include getting rid of the 3sge redtop and throwing in a 2grfe, if I did go the v6 route I have to re-set up the suspension and wheel track so it would keep torque steer to a reasonable feel, currently with my setup I have less than an inch of negative scrub radius so my torque steer is actually pretty decent compared to last years setup which had two inch plus of scrub radius making the steering kick back kinda crazy at times. I have also done some bumpsteer adjusting, anyways i'm getting off topic. What do you guys think of these style vents? are there ones of decent size and not overly crazy large, or perhaps ones made of CF so I don't have to repaint and just be lazy and rivet lol. I'm mainly doing this for a certain look I want, I could care less if it has any positive effects.
some pics
this is the hood im talking about.
front splitter I made
car with splitter on it
I also made some brake deflectors one day when I was bored, But I think the switch from sports pads to track pads for hpde and pdx days may do more.
I do still have my gtz hood scoop laying around, but i'm not sure I want to refit it.
To do or not to do hood vent...
-
- Club4AG Enthusiast
- Posts: 72
- Joined: Mon Apr 21, 2014 11:40 am
Re: To do or not to do hood vent...
Personally. I wouldn't do it.
But it's your call. I can just respect it.
But it's your call. I can just respect it.
Re: To do or not to do hood vent...
Drop vents look more subtle.
Is that a custom RCA lower ball joint?
Is that a custom RCA lower ball joint?
Re: To do or not to do hood vent...
jdm86gtz wrote:Drop vents look more subtle.
Is that a custom RCA lower ball joint?
The RCA's are custom made by Barry at MRP in NZ, he makes some good stuff for the ae92. I had him custom make mine to extend my control arm 25mm more so I could do do some stuff to tweak my steering geometry.
Today I spent a couple minutes on mocking up a vent in the Uras style with the help of CAD (cardboard assisted design) not the real CAD but the REAL CAD). The dimensions are kinda close, the vent style is kinda off, but it does give me an idea of what to expect if i travel this route.
-
- Club4AG Expert
- Posts: 224
- Joined: Sat Feb 15, 2014 7:34 am
Re: To do or not to do hood vent...
I'd say 20 to 30 degrees on the vents, enough to be subtle but crazy enough to say, because RACECAR!
-
- Club4AG Expert
- Posts: 418
- Joined: Wed Jan 09, 2013 9:16 pm
Re: To do or not to do hood vent...
Silver/Black 1985 ae86 gts Heavens Gate Corolla
2001 Carbon Black e39 M5
89' Supra Twin Turbo 1JZ (sold)
2001 Carbon Black e39 M5
89' Supra Twin Turbo 1JZ (sold)
-
- Club4AG Enthusiast
- Posts: 75
- Joined: Fri Mar 22, 2013 8:15 pm
- Location: Minnesota
Re: To do or not to do hood vent...
The more I look at it, I like what you got right now. Just the plain hood... ^_^ Looks good already.
- Mr.Fujiwara
- Club4AG Expert
- Posts: 482
- Joined: Fri Jan 11, 2013 8:13 am
- Location: North Hollywood
Re: To do or not to do hood vent...
canyon_carvers wrote:The more I look at it, I like what you got right now. Just the plain hood... ^_^ Looks good already.
+1 !! (ノ・ェ・)ノ
Old username: Charskiezz
20V BT: Traded For F20c Swap
20V BT: Traded For F20c Swap
Re: To do or not to do hood vent...
Maybe something along these lines ? You could add more louvres to suit.
Or for something a bit more agggressive, perhaps this one. Looks a lot
like the one in your original pic... universal China made scoop.
Cheers... jondee86
Or for something a bit more agggressive, perhaps this one. Looks a lot
like the one in your original pic... universal China made scoop.
Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.