Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Fuel Line Tucked Routing 4-23-14
Tucked Fuel Line Routing...
Tucked Fuel Line Routing...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
In Line HR Fuel Filter 4-24-14
Hybrid Racing In Line Fuel Filter...
Yeahhh I'm ready!
Intallation...
In place...
Intalled...
Hybrid Racing In Line Fuel Filter...
Yeahhh I'm ready!
Intallation...
In place...
Intalled...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
AE111 Vs AE100 Fuel Pump 4-26-14
AE111 Vs AE100 Complete Fuel Pump Assembly...
Ready to Install...
AE111 Vs AE100 Complete Fuel Pump Assembly...
Ready to Install...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
My kid 5-3-14
My Kid on the Car...
My Kid on the Car...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Fender Brace 5-5-14
New Portable Tool Box
Fender Brace In Place...
Need to make a hole to install the nut that will hold the bolt of the brace.
My Friend Michael Helping with it...
Installed...
New Portable Tool Box
Fender Brace In Place...
Need to make a hole to install the nut that will hold the bolt of the brace.
My Friend Michael Helping with it...
Installed...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Two thumbs up! for great built. Good to see another FWD member here.
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
AE86Kai wrote:Two thumbs up! for great built. Good to see another FWD member here.
Thank you very much Sir! Appreciated!
Yes it's very nice set up on this FWD...
Thanks for looking and Subscribe for more updates!
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Installing Custom Tucked Fuel Lines 7-7-14
The Fuel line was hidden routing installed...
Now the return line won't fit as I want it to the new routing... I have clearance issues with the Air Box plate...
Install the back plate bending a bit the Return line.
With a lil Bent goes right there...
Thats how it looks in the new position...
And here a example of the routing, just need to hide and attach it behind the Feed Line...
The Fuel line was hidden routing installed...
Now the return line won't fit as I want it to the new routing... I have clearance issues with the Air Box plate...
Install the back plate bending a bit the Return line.
With a lil Bent goes right there...
Thats how it looks in the new position...
And here a example of the routing, just need to hide and attach it behind the Feed Line...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Engine Bay 7-11-14
Engine Bay Pics...
Engine Bay Pics...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Air Box Fitted Fuel Lines 7-15-14
Installing the OEM Air Box
Installed and Fitted the Tucked Fuel Lines
Another view, how hidden are the Fuel Lines. Now I'm Happy with that routing...
Officially the Tucked Fuel Lines Complete!
Installing the OEM Air Box
Installed and Fitted the Tucked Fuel Lines
Another view, how hidden are the Fuel Lines. Now I'm Happy with that routing...
Officially the Tucked Fuel Lines Complete!
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Tom's Gauge Beezel 7-16-14
Brand New In Box Authentic Tom's Gauge Beezel
Brand New In Box Authentic Tom's Gauge Beezel
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Planing Clutch Line Routing 7-16-14
Tucked Brake Master Cylinder Lines
Brand New OEM Clutch Master Cylinder
Routing For the Line... Trough this hole and Behind the brake line...
And behind the Transmission to the Clutch Slave right there...
Tucked Brake Master Cylinder Lines
Brand New OEM Clutch Master Cylinder
Routing For the Line... Trough this hole and Behind the brake line...
And behind the Transmission to the Clutch Slave right there...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Removing JDM Oil 7-16-14
Removing the JDM Oil from the engine LOL!
Removing the JDM Oil from the engine LOL!
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Radiator Hoses TestFit 7-18-14
Test fit for the Sillicone Radiator Hoses
Test fit for the Sillicone Radiator Hoses
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
JDM Oil Filter 7-21-14
This is how look the Media of the Made In Japan Filter Vs the Thailand (Paper) ones...
Part Number 90915-10003
This is how look the Media of the Made In Japan Filter Vs the Thailand (Paper) ones...
Part Number 90915-10003
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Rep OEM Filter 7-23-14
Toyota Replace the Made In Japan Media Oil filters for this Thailand Made Paper ones... :facepalm::facepalm::facepalm:
Toyota Replace the Made In Japan Media Oil filters for this Thailand Made Paper ones... :facepalm::facepalm::facepalm:
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Engine Fluids 7-24-14
Toyota Factory Red + Water Weather
Mobile Fresh Oil to Use During Start Up...
Toyota Factory Red + Water Weather
Mobile Fresh Oil to Use During Start Up...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Extreme Heat Shrink Custom Tucked Harness 7-24-14
Brand New Custom Tucked With Extreme Heat Shrink Conversion Harness
All New OEM Plugs, Sockets and Pins...
Brand New Custom Tucked With Extreme Heat Shrink Conversion Harness
All New OEM Plugs, Sockets and Pins...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Custom Tucked Brake Prop Valve 7-24-14
Inside Car, Custom Tucked Proportioning Brake Valve and lines relocated..
Inside Car, Custom Tucked Proportioning Brake Valve and lines relocated..
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Pro
- Posts: 644
- Joined: Thu Oct 06, 2016 2:23 pm
- Location: Middle of Hell, Florida
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Looking good man! Friends, family, beer, food, and Japanese cars. What else is there?
Keep up the clean and good work!
Keep up the clean and good work!
Success guardian... Successsssssss..
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Thank you very much Man!
You are right!
Keep lookin g for updates and thanks for watching!
You are right!
Keep lookin g for updates and thanks for watching!
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Perfect example of "preparation is everything".
Love all the details and efforts that you put into this blue machine. Keep up the great work!
Love all the details and efforts that you put into this blue machine. Keep up the great work!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
AE86Kai wrote:Perfect example of "preparation is everything".
Love all the details and efforts that you put into this blue machine. Keep up the great work!
Thanks a lot for your kinds word man!
Has been a log time invested and effort to make sure that the little things goes as I want. Can't wait to have it done and enjoy it after all that as much as I want to!
Keep looking for updates!
Thanks for watching!
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Radiator Hose Clamps 7-24-14
Some Brand New Hybrid Racing Radiator Hose Clamps
Some Brand New Hybrid Racing Radiator Hose Clamps
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Installing New Engine Harness 7-30-14
When I'm Installing the New Harness Made by Tweakd Performance find did they made some mistakes on it.
This one outside the loom...
Should be here...
Short cables
When this is placed here...
And where isn't to be placed visible here...
Wrong Reverse Connector when I specify the Transmission and everything...
Wrong Connector type here too...
Should be like this one...
This Ones relocated Inside Car a bit shorter
The diagnostic connector replaced with this one...
I contact him to solve this issue...
When I'm Installing the New Harness Made by Tweakd Performance find did they made some mistakes on it.
This one outside the loom...
Should be here...
Short cables
When this is placed here...
And where isn't to be placed visible here...
Wrong Reverse Connector when I specify the Transmission and everything...
Wrong Connector type here too...
Should be like this one...
This Ones relocated Inside Car a bit shorter
The diagnostic connector replaced with this one...
I contact him to solve this issue...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
My Boy Playing 7-30-14
My Boy playing in the car...
Tom's Seat Harness Badge...
My Boy playing in the car...
Tom's Seat Harness Badge...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
TOMS RARE Suede SW 8-7-14
New to add on My Collection of TOM's Steering Wheels...
Very RARE TOM's Racing Steering Wheel SUEDE EDITION...
Arrived...
Unpacking...
Teasing Picture!!!
SUEDE EDITION!
New to add on My Collection of TOM's Steering Wheels...
Very RARE TOM's Racing Steering Wheel SUEDE EDITION...
Arrived...
Unpacking...
Teasing Picture!!!
SUEDE EDITION!
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Floor Mats Sold 8-9-14
Bye Bye!
Last Pic of the floor mats... Sold to a friend...
Bye Bye!
Last Pic of the floor mats... Sold to a friend...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Looking for this 8-22-14
I'm looking to get some things...
I love that Titanium Ones!!!
Can't decide which one...
I'm looking to get some things...
I love that Titanium Ones!!!
Can't decide which one...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
-
- Club4AG Expert
- Posts: 388
- Joined: Fri Jan 11, 2013 10:13 pm
Re: Ivan's AE101 Build Thread 4AGE BT 20V6Spd No 56K
Re Routing Harness 8-23-14
Needs to be placed near the ITB's
Noise Filter Not to be used anymore...
Re-Routing the harness...
A lot better now...
But this one needs to be shorter...
and this one too...
Needs to be placed near the ITB's
Noise Filter Not to be used anymore...
Re-Routing the harness...
A lot better now...
But this one needs to be shorter...
and this one too...
Ivan's 4AGE BT 20V 6Spd LSD Build Thread
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!
Just Scroll Down & Enjoy!
http://www.club4ag.com/forums/viewtopic.php?f=7&t=4529
Thanks For Looking!