94 corolla 20V BT swap
-
- Posts: 1
- Joined: Thu Oct 24, 2013 11:47 am
94 corolla 20V BT swap
Hi, my name is Emilio and i have a 94 toyota corolla dx with a 1.8 L engine i want to buy a twin cam 20v blacktop to put on but i need some advise on a few things i would like to know what kind of modification if any do i need to do to be able to put this BT engine in my car. Things like the engine mounts and the drive axles if anybody out there that can help me with this i would appreciate it a lot thanks.
-
- Club4AG Enthusiast
- Posts: 75
- Joined: Fri Mar 22, 2013 8:15 pm
- Location: Minnesota
Re: 94 corolla 20V BT swap
You post in the wrong section.
Anyway, 4AGE 20valve is a straight swap into the 93-97 Corollas but if you get the Blacktop 20valve with the 6speed, then you'lll have to modify the tranny mount (upper mount) only for the 6speed. All 4AGE motors with the 5speed is a direct swap. You should be able to use the axles onto the 20v C series Tranny. As for wiring, save yourself the headache and check with Cam at tweakdperformance. It'll cost you $500 and up but at least it'll get done right and it'll save you the trouble.
Anyway, 4AGE 20valve is a straight swap into the 93-97 Corollas but if you get the Blacktop 20valve with the 6speed, then you'lll have to modify the tranny mount (upper mount) only for the 6speed. All 4AGE motors with the 5speed is a direct swap. You should be able to use the axles onto the 20v C series Tranny. As for wiring, save yourself the headache and check with Cam at tweakdperformance. It'll cost you $500 and up but at least it'll get done right and it'll save you the trouble.