Ariel's Story - A tale of a Utah Corolla
September 4, 2014 – Masking & Primer
After spending a week or two sanding the car, it was ready to be delivered to my dad to finish the prep work and paint it. Since I had done a large amount of the prep work I wasn’t worried about letting my dad paint it again. Plus, he agreed to buy the paint as a birthday present for me. My dad’s pretty awesome.
Bit of wet sanding after being masked.
Primer sprayed and first shots of black for the door trim and bumper pieces!
I wet sanded the whole car that evening and left my dad in charge of painting the car over the weekend. I was anxious to see how it would turn out but wouldn’t know for sure since I had to work all that weekend.
Bit of wet sanding after being masked.
Primer sprayed and first shots of black for the door trim and bumper pieces!
I wet sanded the whole car that evening and left my dad in charge of painting the car over the weekend. I was anxious to see how it would turn out but wouldn’t know for sure since I had to work all that weekend.
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
September 9, 2014 – Painted!
Even though I had committed to painting the car back in August, I hadn’t fully decided on a color scheme until I delivered the car to my dad. I went back and forth on a few ideas, but finally decided on Satin Black for the plastic pieces (front & rear bumpers and door moldings) and the original Bright Red the car was painted in 1985 (color code 3E6). Dad purchased a single-stage paint from a local supplier that was able to replicate the original color. Spray paint was used for the plastics and they turned out well.
Anyway, here are shots of the car. She’s so shiny!
I am very pleased with this paint job! It isn’t perfect, far from it, but this is the best Ariel has looked the whole time we’ve been together. I’m so excited for the Salt City Tinner’s Meet & Car Show Saturday! I can’t wait to show it off! I’ve fallen in love with her all over again now that she’s shiny & pretty (gosh, that sounds so superficial!)! I’ll try to get pics of the other cars at the Tinner’s show.
I love how she looks on those Celica Supra wheels!!
Anyway, here are shots of the car. She’s so shiny!
I am very pleased with this paint job! It isn’t perfect, far from it, but this is the best Ariel has looked the whole time we’ve been together. I’m so excited for the Salt City Tinner’s Meet & Car Show Saturday! I can’t wait to show it off! I’ve fallen in love with her all over again now that she’s shiny & pretty (gosh, that sounds so superficial!)! I’ll try to get pics of the other cars at the Tinner’s show.
I love how she looks on those Celica Supra wheels!!
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
Re: Ariel's Story - A tale of a Utah Corolla
It looks so much better now! It's so shiny and red and red and shiny
There shouldn't be a day that goes by where you don't learn something new.
Re: Ariel's Story - A tale of a Utah Corolla
Wow! Congrats!
Re: Ariel's Story - A tale of a Utah Corolla
Clouds wrote:It looks so much better now! It's so shiny and red and red and shiny
I know, right?!
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
From the Salt City Tinner's Show
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
September 23, 2014 – Sitting pretty
September 23, 2014 – Sitting pretty
A few days after the show and gathering dust, I can’t help but take a minute to stare at my car every time I pass by her. It’s like I’ve fallen in love with her all over again.
A few days after the show and gathering dust, I can’t help but take a minute to stare at my car every time I pass by her. It’s like I’ve fallen in love with her all over again.
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
December 25, 2014 – Christmas after moving
December 25, 2014 – Christmas after moving
So in December I moved from Kearns to Taylorsville. I lost my covered backyard parking but still had a spot on the side of the house for Ariel. With the light dusting of snow we received over Christmas, I couldn’t resist a quick pic.
So in December I moved from Kearns to Taylorsville. I lost my covered backyard parking but still had a spot on the side of the house for Ariel. With the light dusting of snow we received over Christmas, I couldn’t resist a quick pic.
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
January 26, 2015 – Plans for ISS
January 26, 2015 – Plans for ISS
A few days ago, UtahHondas.net announced the return of their Import Spring Showoff in April, their annual car show & BBQ. What started as a Honda/Acura only meet 6 years ago had bloomed into the premier sport compact/import car show for Utah, welcoming all makes, models, and car enthusiasts.
With my fresh coat of paint and renewed love of the car, I decided to enter Ariel into the car show portion of ISS. If I wanted a chance at even getting noticed, I knew I needed to do something about the interior of the car. My racing seat & harness are a bit faded and well used, but I can’t afford a new seat and harness yet. The blue and maroon interior, cracked dash, and mismatched panels are something I can deal with. Since I want to turn this into a track car anyway, I figured I would finally strip it out for the show.
So almost everything came out.
I will strip out the sound deadening, touch up some of the interior paint, redo some wiring, make up some new door panels, and refinish the dash. The dash will be the biggest job. It’s so cracked and ugly!
I feel confident I can get it all done in the 2.5 months I have before the show, but it’s going to be a lot of work. The results will be worth it, though, no matter the outcome of the show.
A few days ago, UtahHondas.net announced the return of their Import Spring Showoff in April, their annual car show & BBQ. What started as a Honda/Acura only meet 6 years ago had bloomed into the premier sport compact/import car show for Utah, welcoming all makes, models, and car enthusiasts.
With my fresh coat of paint and renewed love of the car, I decided to enter Ariel into the car show portion of ISS. If I wanted a chance at even getting noticed, I knew I needed to do something about the interior of the car. My racing seat & harness are a bit faded and well used, but I can’t afford a new seat and harness yet. The blue and maroon interior, cracked dash, and mismatched panels are something I can deal with. Since I want to turn this into a track car anyway, I figured I would finally strip it out for the show.
So almost everything came out.
I will strip out the sound deadening, touch up some of the interior paint, redo some wiring, make up some new door panels, and refinish the dash. The dash will be the biggest job. It’s so cracked and ugly!
I feel confident I can get it all done in the 2.5 months I have before the show, but it’s going to be a lot of work. The results will be worth it, though, no matter the outcome of the show.
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
Re: Ariel's Story - A tale of a Utah Corolla
Glad to see this build updated. It's one of my favorites because it's so grassroots.
There shouldn't be a day that goes by where you don't learn something new.
Re: Ariel's Story - A tale of a Utah Corolla
Thank you!
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
Re: Ariel's Story - A tale of a Utah Corolla
Wow it looks like you have the same rust underneath the rear bumper that I do. If you look inside that fender I bet the entire pinch weld is rusted along the bottom...
I got a patch panel from Wolf Steel, but it only replaces the front panel, so I'll have to fabricate a replacement for the inside panel. Thankfully it's all covered by the rear bumper so if it looks like crap no one will notice.
Keep up the good work!
I got a patch panel from Wolf Steel, but it only replaces the front panel, so I'll have to fabricate a replacement for the inside panel. Thankfully it's all covered by the rear bumper so if it looks like crap no one will notice.
Keep up the good work!
February 13, 2015 - Interior Progress!
February 13, 2015 - Interior Progress!
With most everything pulled out of the car, I first wanted to get an idea about how the original door panels looked and how they went together.
It wasn’t hard to pull them apart.
One door done.
Both door cards apart.
I will use these as a template for the new door cards I plan on making. They won’t be contoured or have armrests like the factory ones. Just something simple.
Glad to be rid of these ugly, cracking plastic trays from the armrests.
I also cleaned off the rest of the foam matting from the roof.
Should be about ready to wipe it down with some goo gone or wax & grease remover.
I also started chipping out the sound deadening. I started on the passenger side. No dry ice, no hammer, no chisel, just a couple of flat head screwdrivers and 30 year old sound material.
After posting that progress on FB, a friend has graciously loaned me some hammers and chisels to finish the job. The right tools make the job so much easier.
After getting most of the passenger side done, I pulled out the driver seat to get to work on that side. This is the first time since I mounted the seat in the car that I’ve removed it. Kinda crazy.
So much room for activities!
I hope to finish chipping out the sound deadening within a week, then I will try to weigh all the pieces I can to see approximately how much weight I removed.
With most everything pulled out of the car, I first wanted to get an idea about how the original door panels looked and how they went together.
It wasn’t hard to pull them apart.
One door done.
Both door cards apart.
I will use these as a template for the new door cards I plan on making. They won’t be contoured or have armrests like the factory ones. Just something simple.
Glad to be rid of these ugly, cracking plastic trays from the armrests.
I also cleaned off the rest of the foam matting from the roof.
Should be about ready to wipe it down with some goo gone or wax & grease remover.
I also started chipping out the sound deadening. I started on the passenger side. No dry ice, no hammer, no chisel, just a couple of flat head screwdrivers and 30 year old sound material.
After posting that progress on FB, a friend has graciously loaned me some hammers and chisels to finish the job. The right tools make the job so much easier.
After getting most of the passenger side done, I pulled out the driver seat to get to work on that side. This is the first time since I mounted the seat in the car that I’ve removed it. Kinda crazy.
So much room for activities!
I hope to finish chipping out the sound deadening within a week, then I will try to weigh all the pieces I can to see approximately how much weight I removed.
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
Re: Ariel's Story - A tale of a Utah Corolla
Love the progress pics! Keep 'em coming!
Feb 17 - Removal Complete!
Another day off, another day spent with a chisel in hand!
This was the part I was most worried about. How much rust would I find in the floor or firewall? Luckily, it looks like most of it is surface rust that can be taken out with a wire wheel.
Also, anyone have a clue about what that little rectangle hole is in the floor? It has a cover and there are identical ones on the passenger side and beneath the front seats. It's like they are a pocket for the frame rails? I dunno.
This area has me worried though...
I also tried to weigh the interior I removed from the car, but my parents digital bathroom scale didn't want to cooperate, so I have no numbers at the moment. Honestly, I am guessing that I only removed 40 or 45 pounds by taking out all the trim, backseats, carpet, headliner, etc. I still want to weigh the chipped off sound deadening. I'll try to collect it all into a bag or bucket and weigh that sometime soon.
This was the part I was most worried about. How much rust would I find in the floor or firewall? Luckily, it looks like most of it is surface rust that can be taken out with a wire wheel.
Also, anyone have a clue about what that little rectangle hole is in the floor? It has a cover and there are identical ones on the passenger side and beneath the front seats. It's like they are a pocket for the frame rails? I dunno.
This area has me worried though...
I also tried to weigh the interior I removed from the car, but my parents digital bathroom scale didn't want to cooperate, so I have no numbers at the moment. Honestly, I am guessing that I only removed 40 or 45 pounds by taking out all the trim, backseats, carpet, headliner, etc. I still want to weigh the chipped off sound deadening. I'll try to collect it all into a bag or bucket and weigh that sometime soon.
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
teaser
Its been a while since I've updated this, but I'm making progress on the dash. I might put together a proper update soon.
Here's a little before/after teaser.
Here's a little before/after teaser.
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
Re: Ariel's Story - A tale of a Utah Corolla
What is that that you are using for the dash? Body filler?
There shouldn't be a day that goes by where you don't learn something new.
Re: Ariel's Story - A tale of a Utah Corolla
I used expanding foam for all the deep cracks and body filler to fill in the little holes & imperfections.
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
Re: Ariel's Story - A tale of a Utah Corolla
Alright, sweet.
There shouldn't be a day that goes by where you don't learn something new.