AE86 GTS Build
Posted: Thu Dec 17, 2015 1:13 pm
by aaronlee133
Hey fellas,
See alot of awesome builds on here and wanted to share mine's... not as 'hard-core' as some of these posts with custom fabrication etc but a build nonetheless. I'm actually recording it as I go along on an instagram account I created:
https://www.instagram.com/akc_lee/.
My main purpose here is to build a fun, reliable, auto-x/track car but still keeping to its originality. Enjoy and Merry Christmas, everyone.
-Aaron
Re: AE86 GTS Build
Posted: Thu Dec 17, 2015 2:05 pm
by Grant
Wow that's a clean engine rebuild. Very similar to what I want to do when I go through a rebuild.
How much work did you outsource to shops? Just block/head work?
Re: AE86 GTS Build
Posted: Thu Dec 17, 2015 3:04 pm
by aaronlee133
Thanks, Grant. I outsourced 2 items: 1) head cleaning/shaving/shimming. This was performed by Shingo @ Bluemoon Performance over here in Costa Mesa. He built Ken Gushi's 2JZ formula drift motor in his FR-S, and 2) fuel injectors by RC-Engineering over here in Torrance, CA to get cleaned and flow inspected. Everything else done in my garage. I will be back to bluemoon to get my Kaaz LSD installed since I don't have the proper tools and such to set backlash.
I intended this to be more fun and hands-on so to the extent I could I did everything myself. Along the way I of course bought air compressor and tools, 20-ton press, cherry picker, and a bunch of other miscellaneous tools and items. Took a while to assess/identify, and stock pile ALL the parts needed, too... either ordering directly from Toyota here in the US or straight from Japan. If anything, feel much more comfortable with the ins-n-outs of the car.
Working on cooling (as my last post indicates) and will be replacing steering rack (to manual), BMC, and clutch MC and slave.
Re: AE86 GTS Build
Posted: Thu Dec 17, 2015 6:56 pm
by trigun402
You should post all the picture here on the forum. Want to see bigger images.