Hey guys, my pinion gear is tore up and missing teeth. I need a new one. Been thinking about changing the final drive ratio at the same time.
I've tried calling and emailing Weir Performance but I haven't gotten a response yet. Anybody know any other place that I could buy a new R&P from? I don't have to get a different FD ratio, but it would be nice.
What about any place, besides Weir, that offers a Spool for the zenki axles? Feel like ditching my welded diff since its what caused my pinion gear to get trashed.
I've got cash in hand, ready to buy a R&P for my car so I can get it back on the road this season. Any help would be great.
where to buy Ring and Pinion?
where to buy Ring and Pinion?
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
Re: where to buy Ring and Pinion?
techno toy tuning sells ring and pinions. Not sure where to get a spool other than Weir. Also make sure you have a professional who sets up diffs for a living do it. Dont take it to a 4x4 shop or something along those lines.
- oldeskewltoy
- Club4AG MASTER
- Posts: 2185
- Joined: Wed Jan 09, 2013 4:44 pm
- Location: Portland, Oregon
Re: where to buy Ring and Pinion?
What final are you looking for???
If you can tolerate a 3.90, you can get a spool, all mounted in a housing ready to install........
if you need more gear they also sell 4.10 welded diffs....
http://store.uslegendcars.com/site/search.cfm type "diff" into search
I've purchased 2 from these people... both diff units, but NOT welded (open). I used one in my AE86 about 10 years ago... and I'm currently running a 3.9 in my AE71
If you can tolerate a 3.90, you can get a spool, all mounted in a housing ready to install........
if you need more gear they also sell 4.10 welded diffs....
http://store.uslegendcars.com/site/search.cfm type "diff" into search
I've purchased 2 from these people... both diff units, but NOT welded (open). I used one in my AE86 about 10 years ago... and I'm currently running a 3.9 in my AE71
OST Cyl head porting, - viewtopic.php?f=22&t=300
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Building a great engine takes knowing the end... before you begin
Enjoy Life... its the only one you get!
Re: where to buy Ring and Pinion?
Update!!
After a couple of calls and emails, I was able to get in touch with Spence from Weir Performance. I was able to order the spool, 4.778 r&p, and diff rebuild kit I was looking for. Part should show up tomorrow or Saturday, actually.
After a couple of calls and emails, I was able to get in touch with Spence from Weir Performance. I was able to order the spool, 4.778 r&p, and diff rebuild kit I was looking for. Part should show up tomorrow or Saturday, actually.
1985 Toyota Corolla Sport GTS - Ariel - 105.5 whp 93.8 ft-lbs of torque
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow
2006 Toyota Tacoma SR5 V6 6MT - mmm, taco!
2006 Mitsubishi Lancer ES 5MT - 2slow