For those that have removed the axle oil seals from the housing - can you please share how this was performed?i purchased an seal puller (2 hooks) but its clear that that won't work - the seals are in there too snug.
Thanks,
-Aaron
Axle oil seals
-
aaronlee133
- Club4AG Expert
- Posts: 297
- Joined: Thu Aug 15, 2013 4:17 pm
Re: Axle oil seals
Resolved. 5 lb slide hammer and bearing pullers. popped right out. To install new oil seals, use a 59mm bearing driver.
-Aaron
-Aaron