I know it's the fuel injector resistor but what car is it from? It was in my box o' parts. I ask because it has 2 plugs on it....not the typical 1 plugger. Thanks.
Pic Inside.....help identify this part?
Re: Pic Inside.....help identify this part?
1st one is a resistor box for the 16v 4age largeport AE86. Not sure what the second one is. Dont have that part on my BT 20v.
Re: Pic Inside.....help identify this part?
Jeonsah wrote:1st one is a resistor box for the 16v 4age largeport AE86. Not sure what the second one is. Dont have that part on my BT 20v.
Thanks for reply....but why does it have 2 plugs? All the ones i've seen including one on my car has only 1 plug.
Re: Pic Inside.....help identify this part?
the 2 plugs could be from something like a v6 or v8? the 2nd looks like a sensor from a 1zz or something, cam angle sensor though for sure. do you have p/n's on anything?
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: Pic Inside.....help identify this part?
morgan wrote:the 2 plugs could be from something like a v6 or v8? the 2nd looks like a sensor from a 1zz or something, cam angle sensor though for sure. do you have p/n's on anything?
Thanks for the help......no part numbers on anything...maybe if i cleaned the fi resistor box it might reveal a part number but the sensor does not have a part number. Thanks.
Re: Pic Inside.....help identify this part?
Google says this....
Cheers... jondee86
Toyota HiLux Pickup Truck 4Runner 22RE INJECTOR RESISTOR ballast EFI 28515-28030
Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.
Re: Pic Inside.....help identify this part?
jondee86 wrote:Google says this....Toyota HiLux Pickup Truck 4Runner 22RE INJECTOR RESISTOR ballast EFI 28515-28030
Cheers... jondee86
Oh nice! And a part number to boot. Thanks....now for the sensor.
Re: Pic Inside.....help identify this part?
The sensor looks like a cam or crank sensor from a1uzfe.
Re: Pic Inside.....help identify this part?
Leaning towards crank sensor though. Seems i remember it due to it being held in by 1 10mm bolt.
Re: Pic Inside.....help identify this part?
4agshoob wrote:Leaning towards crank sensor though. Seems i remember it due to it being held in by 1 10mm bolt.
Yeah I was thinking it was a crank sensor but didnt know from what engine...1uz you say? Thank you very much for the info.