![Image](https://s19.postimg.org/d7x4iwsc3/20180206_191430.jpg)
I was thinking though....what if I cut it on the yellow line (see pic below). Would I be able to find a lip like what is pointed in blue so the hose would stay on and seal properly?
![Image](https://s19.postimg.org/n585c3xer/20180206_200643.jpg)
If so, i could then just connect a T connector to a small rad hose and the part would be good as new.... but I'm not sure about how to get that lip ((whatever its called) or if it's even necessary (im sure it is or why would it be there?)) on the new shorter section of pipe.
![Image](https://s19.postimg.org/hh1ule8jn/20180206_202003.jpg)
Any help is appreciated....thx.