Front coilover spring

RLZ · Postby **RLZ** » Thu Apr 11, 2013 6:58 pm

Hi, I need a stiffer springs on the front coilovers, does this fit?
http://www.ebay.com/itm/STANCE-Suspensi ... 43&vxp=mtr

RLZ · Postby **RLZ** » Mon Apr 15, 2013 11:10 pm

anyone?

ronny · Postby **ronny** » Mon Apr 15, 2013 11:13 pm

65mm is the size - depending on what perch ur using

RLZ · Postby **RLZ** » Tue Apr 16, 2013 12:02 am

ronny wrote:65mm is the size - depending on what perch ur using

Should be the one from T3, so if T3 does it works? thanks!

ga_goosh · Postby **ga_goosh** » Tue Apr 16, 2013 4:42 am

yes that will fit the perches from the ground control kit. i.d. is 2.5 inches and so is most coilover perches

RLZ · Postby **RLZ** » Tue Apr 16, 2013 9:19 am

ga_goosh wrote:yes that will fit the perches from the ground control kit. i.d. is 2.5 inches and so is most coilover perches

do you think they are the same length? thanks!

ga_goosh · Postby **ga_goosh** » Thu Apr 18, 2013 11:11 am

yei am running 8 inch springs on my coilovers you shouldnt have any issues with those springs

RLZ · Postby **RLZ** » Thu Apr 18, 2013 3:34 pm

ga_goosh wrote:yei am running 8 inch springs on my coilovers you shouldnt have any issues with those springs

ok thanks a lot!