Hood is Jammed - Release works

User avatar
saiGone
Club4AG Expert
Posts: 352
Joined: Tue Apr 08, 2014 1:42 pm

Hood is Jammed - Release works

Postby saiGone » Tue Apr 08, 2014 9:42 pm

Hey Club4ag,

My hood is jammed (The latch is frozen shut)

I used to push my hood down 95% and would still be able to open it. Last time i worked on the car, i absent mindedly slammed it shut.

My hood release cable works fine.


Anyone know how i can open the hood now? :oops:


thnx.
Club 4AG member since 05 (Formally SaigonsSon)

Image

meifert
Club4AG Enthusiast
Posts: 82
Joined: Tue Dec 17, 2013 8:26 pm

Re: Hood is Jammed - Release works

Postby meifert » Wed Apr 09, 2014 8:43 am

have someone else lift up on the hood while you pull the hood release. it should open up.
1984 Corolla SR5.....banana on wheels
Buddy Club Spec 2 Over axle, T3 Test Pipe, T3 Bomber Bar, T3 Ultimate Rear Brace, Enkei Apache 2 wheels, (Weber carb and Cam not installed)

Cheap, good or fast.....pick two.

MisterJerk
Club4AG Pro
Posts: 582
Joined: Wed Jan 09, 2013 6:10 pm

Re: Hood is Jammed - Release works

Postby MisterJerk » Wed Apr 09, 2014 8:47 am

^^, what he said. Check the latch and stuff out when its open, could be bent. might just need a bit of lube.

Deuce Cam
Posts: 1346
Joined: Sun Jan 13, 2013 2:41 pm
Location: AZ

Re: Hood is Jammed - Release works

Postby Deuce Cam » Wed Apr 09, 2014 9:05 am

meifert wrote:have someone else lift up on the hood while you pull the hood release. it should open up.


My ae92 had this problem. I kept a bungee cord in the car so I could open the hood myself :lol: . Hook one end of the cord to the hood release lever, and the other end somewhere that will keep tension on the cord and the lever fully engaged (the seat belt mount on the b pillar would be a good spot), then try lifting the hood. Don't forget to unhook the bungee cord before closing the hood otherwise it won't latch.

User avatar
saiGone
Club4AG Expert
Posts: 352
Joined: Tue Apr 08, 2014 1:42 pm

Re: Hood is Jammed - Release works

Postby saiGone » Wed Apr 09, 2014 11:57 am

Good idea on the buddy system. I might need to get a new latch once i open it.

Grease would probably be the best lube?
Club 4AG member since 05 (Formally SaigonsSon)

Image

User avatar
idreamofdrifting
Club4AG MASTER
Posts: 1122
Joined: Fri Jan 11, 2013 2:35 pm

Re: Hood is Jammed - Release works

Postby idreamofdrifting » Thu Apr 10, 2014 1:02 am

saiGone wrote:Grease would probably be the best lube?


Image
Image

User avatar
saiGone
Club4AG Expert
Posts: 352
Joined: Tue Apr 08, 2014 1:42 pm

Re: Hood is Jammed - Release works

Postby saiGone » Fri Apr 18, 2014 1:42 pm

damn... still stuck. Going to try and remove the grill/ bumper
Club 4AG member since 05 (Formally SaigonsSon)

Image

meifert
Club4AG Enthusiast
Posts: 82
Joined: Tue Dec 17, 2013 8:26 pm

Re: Hood is Jammed - Release works

Postby meifert » Fri Apr 18, 2014 6:46 pm

saiGone wrote:damn... still stuck. Going to try and remove the grill/ bumper


Was the car wrecked at one point?
1984 Corolla SR5.....banana on wheels
Buddy Club Spec 2 Over axle, T3 Test Pipe, T3 Bomber Bar, T3 Ultimate Rear Brace, Enkei Apache 2 wheels, (Weber carb and Cam not installed)

Cheap, good or fast.....pick two.

User avatar
saiGone
Club4AG Expert
Posts: 352
Joined: Tue Apr 08, 2014 1:42 pm

Re: Hood is Jammed - Release works

Postby saiGone » Mon Apr 21, 2014 12:25 pm

Came from a rusty donor. Had 2 people pull on the hood. It's greased up and working fine now.
Club 4AG member since 05 (Formally SaigonsSon)

Image

aukword1
Club4AG Expert
Posts: 485
Joined: Fri Dec 06, 2013 6:03 pm

Re: Hood is Jammed - Release works

Postby aukword1 » Fri Apr 25, 2014 6:43 pm

soak that **** in some phosphoric acid for a couple of days...i had the same problem when i bought the car...now it works like it was brand new..