So I have a Weber on my 3tc and it says to start from a baseline start, with 1 turn in on the speed screw and 2 turns out on the mixture,. thing is, car runs fine at about 2 turns out on the mixture, but I can have the idle speed screw without any contact to the throttle,? If I turn the screw in I'll be over idling at around 1,100 rpm,?

Just remembered I Have the distributor at full advance,. Just started playing Round with it last week or so,. I noticed when I did that the engine ran better Nd had a throat sound to it, a bit more torque but Idk feels like I could still get more power somehow,?