FX GTS igniter with ae86 wiring

garebare8520
Club4AG Regular
Posts: 23
Joined: Sat Mar 23, 2013 7:55 pm
Location: Vancouver,WA

FX GTS igniter with ae86 wiring

Postby garebare8520 » Tue Sep 16, 2014 2:59 pm

Desperately looking for the igniter/coil connector pinout for an ae82 FX GTS. Correct me if I'm wrong but the pinout for the ae86 should look like this:
IGT=Black
IGF=Black/Yellow
Tach=Black
IGN+=Black/Orange
NE=Red
The colored wires of the ae82 FX GTS are as follows: Beige, Green, Yellow, Light Blue, and Gray. Any help would be much appreciated.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


allencr
Club4AG Expert
Posts: 374
Joined: Thu Jan 10, 2013 9:59 pm

Re: FX GTS igniter with ae86 wiring

Postby allencr » Tue Sep 16, 2014 10:14 pm

From factory manual RM069U 1988 Corolla FX/FX16 US & Canada
There's no light blue or beige in the color chart.
Igniter pins> 6=B, 1=B, 4=B-Y, 2=W
ECU terminals> NE=W, IGF=B-Y, IGT=B, G+=B, G-=W

garebare8520
Club4AG Regular
Posts: 23
Joined: Sat Mar 23, 2013 7:55 pm
Location: Vancouver,WA

Re: FX GTS igniter with ae86 wiring

Postby garebare8520 » Fri Sep 19, 2014 12:30 pm

Thank you for the quick reply. I have tried to post a picture with no avail so I will try to be as descriptive as I can. I will try to pull one from the web. When I went to Toyota to identify it they said it was from an 87 fx16 so I dont know if the wiring diagrams are interchangeable. Also the 2 wire round plug going to the distributor is the early style plug usually on ae86's while the 5 wire plug is the later style plug square in shape. Part #''s for Igniter Assy is 89620-02010 and Coil w/Igniter is 19070-02010. Any help is appreciated.
Image

garebare8520
Club4AG Regular
Posts: 23
Joined: Sat Mar 23, 2013 7:55 pm
Location: Vancouver,WA

Re: FX GTS igniter with ae86 wiring

Postby garebare8520 » Sun Sep 21, 2014 9:53 am

Image
Another link to the igniter coil I want to install on my ae86.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.


jrae82
Club4AG Enthusiast
Posts: 79
Joined: Sat Feb 16, 2013 9:28 am

Re: FX GTS igniter with ae86 wiring

Postby jrae82 » Tue Sep 23, 2014 6:19 pm

I'm running ae86 igniter on my fx16 with no problem. I just spliced that dizzy plug that is different. Color match the wiring. Been running it for a year now. Hope that helps

garebare8520
Club4AG Regular
Posts: 23
Joined: Sat Mar 23, 2013 7:55 pm
Location: Vancouver,WA

Re: FX GTS igniter with ae86 wiring

Postby garebare8520 » Mon Oct 06, 2014 12:12 pm

Thank you for the replies and sorry for not being more specific. Finally got my ae86 running with some educated guesses. This is if you want to install 87-88 fx16/GTS into an ae86. Now I need to figure out why my exhaust gets so hot within seconds, I'm thinking TPS or timing.
fx16 ae86
Green------Red
Grey--------Black/yellow
Blue--------Black
Brown------Black/orange
Yellow-----Black

User avatar
jondee86
Moderator
Posts: 2654
Joined: Fri Jan 11, 2013 10:21 pm
Location: Wellington, New Zealand

Re: FX GTS igniter with ae86 wiring

Postby jondee86 » Mon Oct 06, 2014 1:24 pm

garebare8520 wrote: Now I need to figure out why my exhaust gets so hot within seconds

Usual cause is retarded ignition timing. Use a timing light to check.

Cheers... jondee86
The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore, all progress
depends on the unreasonable man.

Disable adblock

This site is supported by ads and donations.
If you see this text you are blocking our ads.
Please consider a Donation to support the site.



Return to “TECH: Corolla AE86”

Who is online

Users browsing this forum: Google [Bot] and 32 guests