Page 1 of 1
1986 4age 16v injector clip
Posted: Fri Apr 10, 2015 2:02 pm
by RLZ
The injector clips are kinda old and they are easy to break when you try to remove it, I header some Honda clips will fits but anyone know what model or what part number of it? Since Honda parts are easier to find I think! Thanks for any help!
Re: 1986 4age 16v injector clip
Posted: Sat Apr 11, 2015 8:33 am
by ZINCHOTRAN
I bought from Herb and they came with the metal clips.
Herb Policarpio
e parts
Cabe Toyota
2895 Long Beach Blvd
Long Beach, CA 90806
e.
herb@cabetoyota.comtel 562.595.7411
fax 562.595.4740
cabeperformance.com
http://stores.ebay.com/Cabe-Toyota
Re: 1986 4age 16v injector clip
Posted: Sat Apr 11, 2015 12:11 pm
by RLZ
They are current out of stock on their site tho, but I haven't contact them yet to confirm
Re: 1986 4age 16v injector clip
Posted: Sat Apr 11, 2015 1:04 pm
by tiprock
1st gen integra
early 90s accord.
iirc they have to be the dohc engines
Re: 1986 4age 16v injector clip
Posted: Mon Apr 13, 2015 8:47 am
by MisterJerk
Re: 1986 4age 16v injector clip
Posted: Mon Apr 13, 2015 5:28 pm
by RLZ
are those come with wires? or just the clip itself?
Re: 1986 4age 16v injector clip
Posted: Mon Apr 13, 2015 5:28 pm
by RLZ
tiprock wrote:1st gen integra
early 90s accord.
iirc they have to be the dohc engines
thanks
Re: 1986 4age 16v injector clip
Posted: Tue Apr 14, 2015 7:11 am
by MisterJerk
RLZ wrote: are those come with wires? or just the clip itself?
Just the bare terminals. makes a much cleaner install without splicing wires.
Re: 1986 4age 16v injector clip
Posted: Tue Apr 14, 2015 8:03 am
by RLZ
Oh yeah that's true, thank you!
Re: 1986 4age 16v injector clip
Posted: Tue Apr 14, 2015 10:55 am
by MisterJerk
its the best pic i have on my imgur album of them installed. pardon my mess... lol. its a couple years old.
Re: 1986 4age 16v injector clip
Posted: Wed Apr 15, 2015 8:45 am
by RLZ
MisterJerk wrote:its the best pic i have on my imgur album of them installed. pardon my mess... lol. its a couple years old.
its nice and clean, thank you for your help
Re: 1986 4age 16v injector clip
Posted: Wed Apr 15, 2015 8:49 am
by RLZ
RLZ wrote:MisterJerk wrote:its the best pic i have on my imgur album of them installed. pardon my mess... lol. its a couple years old.
its nice and clean, to replace them does it just release the wires from the old one and put the wires back on the new one? thanks
Re: 1986 4age 16v injector clip
Posted: Fri Apr 17, 2015 7:53 am
by MisterJerk
it wasnt that easy. the wires have to pass through the plastic, then the terminals are crimped on and the wire with terminal is pulled into the connector until it clicks.
I removed the original terminals by uncrimping, and cleaning up the wires.
Re: 1986 4age 16v injector clip
Posted: Mon Apr 20, 2015 4:43 pm
by RLZ
MisterJerk wrote:it wasnt that easy. the wires have to pass through the plastic, then the terminals are crimped on and the wire with terminal is pulled into the connector until it clicks.
I removed the original terminals by uncrimping, and cleaning up the wires.
ok, got it, i will try it, thank you!