MR2 Steering Rack Problem
-
- Club4AG Enthusiast
- Posts: 72
- Joined: Fri Jan 31, 2014 7:21 am
- Location: Rhode Island
MR2 Steering Rack Problem
How's it going I just recently did a mr2 steering rack conversion. The issue I ran into is that my wheels are extremely toed with my outer tie being adjusted out all the way. I'm running BC coil overs with there rcas I did Rockauto Power steering Inner and outer tie rods, MK3 intermediate shaft, adapter bushing from excessive . I ordered a different sent of power steering inner tie rods and same thing they are the same as the ones install on my rack now. So I'm at stand still don't know what to do any suggestions or advice would be much appreciated
Re: MR2 Steering Rack Problem
you need manual inner & outer tie rods
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
-
- Club4AG Enthusiast
- Posts: 72
- Joined: Fri Jan 31, 2014 7:21 am
- Location: Rhode Island
Re: MR2 Steering Rack Problem
morgan wrote:you need manual inner & outer tie rods
I read all over the forums that you need power steering inner and outers though?