I wanted to get these wheels for my Corolla. What do you think of them, as in look, sizing, ability to still turn. No body modifications, just stock fenders. I did purchase Greddy Coilovers and will install those.


(Front, 2 wheels) Work Equip 03 Wheel - 15x6.5 / Offset +3 (A-Disk)
* WORK-EQUIP03-1565-3-A
* Color: Black Polish
* PCD: 4x114.3
* Pierce Bolts: Standard
* Barrel Color: Standard

(Rear, 2 wheels) Work Equip 03 Wheel - 15x7.0 / Offset -6 (O-Disk)
* WORK-EQUIP03-1570-6-O
* Color: Black Polish
* PCD: 4x114.3
* Pierce Bolts: Standard
* Barrel Color: Standard

I would use the rears for the fronts, and get 7.5” for the rear.

morgan wrote:I would use the rears for the fronts, and get 7.5” foe the rear.

+1

idreamofdrifting wrote:

morgan wrote:I would use the rears for the fronts, and get 7.5” foe the rear.

+1

You think so? Hmm....I may have already ordered the ones I posted on Work. It should still look ok right? Ahhh!!!!

And on that note, what would be a good tire size for these? 195/45/15 or 195/50/15 for the front and then 205/50/15 for the rear?