Work Equip 03 Question

yabaiani
Club4AG Expert
Posts: 203
Joined: Sun Jan 13, 2013 8:28 am

Work Equip 03 Question

Postby yabaiani » Sat Nov 02, 2019 4:44 pm

I wanted to get these wheels for my Corolla. What do you think of them, as in look, sizing, ability to still turn. No body modifications, just stock fenders. I did purchase Greddy Coilovers and will install those.


(Front, 2 wheels) Work Equip 03 Wheel - 15x6.5 / Offset +3 (A-Disk)
* WORK-EQUIP03-1565-3-A
* Color: Black Polish
* PCD: 4x114.3
* Pierce Bolts: Standard
* Barrel Color: Standard

(Rear, 2 wheels) Work Equip 03 Wheel - 15x7.0 / Offset -6 (O-Disk)
* WORK-EQUIP03-1570-6-O
* Color: Black Polish
* PCD: 4x114.3
* Pierce Bolts: Standard
* Barrel Color: Standard

User avatar
morgan
Club4AG Pro
Posts: 918
Joined: Thu Jan 10, 2013 10:29 pm
Location: og, nj

Re: Work Equip 03 Question

Postby morgan » Sat Nov 02, 2019 6:35 pm

I would use the rears for the fronts, and get 7.5” for the rear.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up

User avatar
idreamofdrifting
Club4AG MASTER
Posts: 1122
Joined: Fri Jan 11, 2013 2:35 pm

Re: Work Equip 03 Question

Postby idreamofdrifting » Mon Nov 04, 2019 11:41 am

morgan wrote:I would use the rears for the fronts, and get 7.5” foe the rear.


+1
Image

yabaiani
Club4AG Expert
Posts: 203
Joined: Sun Jan 13, 2013 8:28 am

Re: Work Equip 03 Question

Postby yabaiani » Wed Nov 06, 2019 7:17 am

idreamofdrifting wrote:
morgan wrote:I would use the rears for the fronts, and get 7.5” foe the rear.


+1


You think so? Hmm....I may have already ordered the ones I posted on Work. It should still look ok right? Ahhh!!!! :shock:

And on that note, what would be a good tire size for these? 195/45/15 or 195/50/15 for the front and then 205/50/15 for the rear?