Header and down pipe gasket
Header and down pipe gasket
hi, does anyone know where to buy gaskets for the ae86 16v header and down pipe gasket? just got the aftermarket header so I might need a set of new gasket. I'm in SoCal. Thanks!
Re: Header and down pipe gasket
Check eBay or rockauto, they should have the gaskets.
Re: Header and down pipe gasket
jojor42 wrote:Check eBay or rockauto, they should have the gaskets.
Its 2.5"right?
Re: Header and down pipe gasket
OBX sells a kit on ebay for this, its $15
http://www.ebay.com/itm/181080185275?ss ... 1423.l2649
http://www.ebay.com/itm/181080185275?ss ... 1423.l2649
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
Re: Header and down pipe gasket
any of the chain auto parts stores carry 2 bolt exhaust gaskets. you just have to know the size of the piping. stock cat is 2"
OBX has a 2" outlet
Pacesetter is 2.25
which aftermarket header? not all are the same size. and i havent seen very many 2.5" exhausts for the ae86, other than the CXracing one.
OBX has a 2" outlet
Pacesetter is 2.25
which aftermarket header? not all are the same size. and i havent seen very many 2.5" exhausts for the ae86, other than the CXracing one.
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/
Re: Header and down pipe gasket
morgan wrote:OBX sells a kit on ebay for this, its $15
http://www.ebay.com/itm/181080185275?ss ... 1423.l2649
isn't it only for 20v?
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
Re: Header and down pipe gasket
RLZ wrote:isn't it only for 20v?
nope the ends are slotted for both 16 and 20
manifold gaskets are cheap and arent anything special, felpro works.
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/
Re: Header and down pipe gasket
MisterJerk wrote:any of the chain auto parts stores carry 2 bolt exhaust gaskets. you just have to know the size of the piping. stock cat is 2"
OBX has a 2" outlet
Pacesetter is 2.25
which aftermarket header? not all are the same size. and i havent seen very many 2.5" exhausts for the ae86, other than the CXracing one.
I don't know what brand of the header, but looks like pacesetter 4-2-1.
Last edited by RLZ on Wed Mar 27, 2013 12:10 pm, edited 1 time in total.
Re: Header and down pipe gasket
RLZ wrote:morgan wrote:OBX sells a kit on ebay for this, its $15
http://www.ebay.com/itm/181080185275?ss ... 1423.l2649
isn't it only for 20v?
nope, you can see the slots for 16v & 20v applications. i have bought this kit before, the gasket for the header/downpipe flange is 2.5" I.D.
pacesetter doesnt utilize that gasket since its a shitty slip joint
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: Header and down pipe gasket
nope, you can see the slots for 16v & 20v applications. i have bought this kit before, the gasket for the header/downpipe flange is 2.5" I.D.
pacesetter doesnt utilize that gasket since its a shitty slip joint[/quote]
So do you know the size will fit pacesetter header?
pacesetter doesnt utilize that gasket since its a shitty slip joint[/quote]
So do you know the size will fit pacesetter header?
Re: Header and down pipe gasket
the one in the kit will fit the header where it meets the catalytic converter. its only a little bigger for the opening, i dont think it will hurt none. youll be fine with that kit, i like the OBX ones because they are graphite and dont leak like the paper or crappy metal/paper layered ones.
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: Header and down pipe gasket
morgan wrote:the one in the kit will fit the header where it meets the catalytic converter. its only a little bigger for the opening, i dont think it will hurt none. youll be fine with that kit, i like the OBX ones because they are graphite and dont leak like the paper or crappy metal/paper layered ones.
so as you said the OBX kits will fit my pacesetter header where meet the cat or test pipe right?
Re: Header and down pipe gasket
I might still have a gasket not on my car, I'll measure if so. But yeah, it should fit fine
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: Header and down pipe gasket
morgan wrote:I might still have a gasket not on my car, I'll measure if so. But yeah, it should fit fine
That would be great if you can measure your gasket before I buy them.
Re: Header and down pipe gasket
wouldnt it be easier to just measure your header to get the size for the cat/test gasket?...
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
Re: Header and down pipe gasket
pacesetter has a 2.25" outlet. go to a local parts store and get a $2.00 gasket.
actually I have one, brand new in the package. HMU if you too lazy to go to the parts store.
actually I have one, brand new in the package. HMU if you too lazy to go to the parts store.
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/
Re: Header and down pipe gasket
MisterJerk wrote:pacesetter has a 2.25" outlet. go to a local parts store and get a $2.00 gasket.
actually I have one, brand new in the package. HMU if you too lazy to go to the parts store.
I did went to the autozone but they don't have them. where are you located? I saw eBay has the test pipe for sale come with 2 gaskets but like $80 it's not cheap
Re: Header and down pipe gasket
FDeeznuts wrote:wouldnt it be easier to just measure your header to get the size for the cat/test gasket?...
yea I did, it's 2.25" , I want to test fit but local store just don't have them, online I can't test fit I may get the wrong one.
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
Re: Header and down pipe gasket
RLZ wrote:MisterJerk wrote:I did went to the autozone but they don't have them. where are you located? I saw eBay has the test pipe for sale come with 2 gaskets but like $80 it's not cheap
East coast, VA. I got mine at pepboys, napa also has them.
heres a google link... http://www.google.com/shopping/product/2101226354477194573?q=2.25%20exhaust%20flange%20gasket&hl=en&bav=on.2,or.r_qf.&bvm=bv.44442042,d.dmg&biw=1030&bih=565&sa=X&ei=8INUUa7BJqXC4APMvYGoCg&ved=0CF0Q8wIwAQ
summit racing
http://www.summitracing.com/parts/vpe-1456/overview/
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/
Re: Header and down pipe gasket
MisterJerk wrote:RLZ wrote:MisterJerk wrote:I did went to the autozone but they don't have them. where are you located? I saw eBay has the test pipe for sale come with 2 gaskets but like $80 it's not cheap
East coast, VA. I got mine at pepboys, napa also has them.
heres a google link... http://www.google.com/shopping/product/2101226354477194573?q=2.25%20exhaust%20flange%20gasket&hl=en&bav=on.2,or.r_qf.&bvm=bv.44442042,d.dmg&biw=1030&bih=565&sa=X&ei=8INUUa7BJqXC4APMvYGoCg&ved=0CF0Q8wIwAQ
summit racing
http://www.summitracing.com/parts/vpe-1456/overview/
The shape doesnt look like will completely fit, I have got one from pedboys before and it leaks.
Last edited by RLZ on Thu Mar 28, 2013 11:56 am, edited 1 time in total.
Re: Header and down pipe gasket
You've measured the ID of the exhuast and it's 2.25", correct? Then all you need is any 2 bolt 2.25" exhaust gasket.
Here you go: http://vibrantperformance.com/catalog/i ... _1068_1126
You could also try local import tuner shops to see if they stock any. Any shop that specializes in Honda's or ae86's should have some in that size.
Here you go: http://vibrantperformance.com/catalog/i ... _1068_1126
You could also try local import tuner shops to see if they stock any. Any shop that specializes in Honda's or ae86's should have some in that size.
Re: Header and down pipe gasket
Deuce Cam wrote:You've measured the ID of the exhuast and it's 2.25", correct? Then all you need is any 2 bolt 2.25" exhaust gasket.
Here you go: http://vibrantperformance.com/catalog/i ... _1068_1126
You could also try local import tuner shops to see if they stock any. Any shop that specializes in Honda's or ae86's should have some in that size.
Yeah I will try again asking around, auto zone doesn't have it, pedboys will leaks. I might just go to muffler shop if they have some use or new.
Re: Header and down pipe gasket
that vibrant gasket is garbage. the metal & paper layered gaskets suck, get a graphite or copper.
i bought one of these to test out, awesome. it has a crush ring to ensure better sealing
http://www.summitracing.com/parts/sce-4 ... 4AodiWkAJA
stick with either graphite or copper, the rest will leak in a week
i bought one of these to test out, awesome. it has a crush ring to ensure better sealing
http://www.summitracing.com/parts/sce-4 ... 4AodiWkAJA
stick with either graphite or copper, the rest will leak in a week
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up
Re: Header and down pipe gasket
If you have to have the graphite gaskets go here: http://catalog.remflex.com/category_s/103.htm because those may be hard to find locally. Most of the tuner shops are going to have the cheap metal/paper 'vibrant style' gaskets.
The graphite gaskets can blow out. I've seen it happen a bunch in my Subaru days. They'll probably hold up better on a NA setup though.
The graphite gaskets can blow out. I've seen it happen a bunch in my Subaru days. They'll probably hold up better on a NA setup though.
Re: Header and down pipe gasket
I'm appreciate you guys helps, thanks a lot !
Re: Header and down pipe gasket
RLZ wrote:FDeeznuts wrote:wouldnt it be easier to just measure your header to get the size for the cat/test gasket?...
yea I did, it's 2.25" , I want to test fit but local store just don't have them, online I can't test fit I may get the wrong one.
Dude, go to autozone. Ask them to find you a two bolt gasket that is the size you need. I did that exact same thing, but ended up just buying a sheet of gasket material for $11. You can make all the gaskets you need. Also for the exhaust mani, you can get a felpro one from autozone for $12. I know because i did that exact thing.
Re: Header and down pipe gasket
You get what you pay for, that sheet gasket sucks a big D
haha cali...i got one of your 86's and you're not getting it back.
My turd of an 86
20v swapped 86 write-up
My turd of an 86
20v swapped 86 write-up