I have a 4age with leaky lines from my oil cooler. I hear that there is a aluminum adapter plate that eliminates the need for cooler, the oil filter attaches to the adapter. Can anyone tell me where and how to get this adapter. This my be on the mr2 motor later not sure.

If you take the oil cooler off the filter will bolt straight to the block.

or you could buy the hoses at the parts store. Just plain ole hoses. nothing special.

MisterJerk wrote:or you could buy the hoses at the parts store. Just plain ole hoses. nothing special.

nah you have to use oil rated hose from an oil cooler or trans cooler. they are 3/8 by the way