Spoiler Hardware

[truenoboy]

Has anybody installed the OEM spoiler with any hardware other than the stock clips? If not, anyone know how much of each clip is needed? I know there are 2 different types of clips, but don't how many of each are needed.

[Deuce Cam]

The oem spoilers are a combination of pop clips and bolts with retention nuts. The nuts are square shaped and slide into little channels under the spoiler. I had a hatch spoiler secured by just the 3 nuts/bolts (1 in the center and 1 on each end).

[truenoboy]

Do you by chance know where I can get the square nuts from? I have a spoiler but no hardware, so need to figure out how I'm going to get this thing on.

[Deuce Cam]

I'd bring it to Ace Hardware, etc. and see if they have anything close. You just need to find a square nut that fits the little channel, then find a bolt with matching threads.

It doesn't look like Toyota sells the nuts separately, unless they come with the bolts which is a long shot. The bolt part number is 9338316010.

[MisterJerk]

if i can remember correctly, i believe the nuts/bolts for the oem spoiler bolts are m6.

can try CabeToyota, if you want OEM hardware