Crap Load of 4AGE parts... EAST COAST

zandrew
Club4AG Regular
Posts: 10
Joined: Sun Feb 24, 2013 8:00 pm

Crap Load of 4AGE parts... EAST COAST

Postby zandrew » Sun Feb 24, 2013 8:18 pm

I am new to this forum. So I will give some details on the parts. I bought a project AE86 about 3 months ago from a local person and never got into the car. I got caught up in the fad I guess. I got a crap load of parts with it I would like to sale. After selling a few items on eBay I had a buyer suggest coming here to sell them. These parts are located currently in WV and I am away on work. I have time to post details today and hope to get pictures up tomorrow or Tuesday. I am hoping this is not breaking the rules. (Also please forgive some of the descriptions as I am not 100% with 4AG lingo lol and am going off the guy I bought the car from) ALL PRICES ARE OBO. If you see a price that is too high contact me.

All parts are located around Lewisburg WV 24901

I have small port, fuel rail, and intake manifold. I was told they need to go as a set. $250 plus shipping
7 RIB block that is great shape $100 plus shipping
4AGZE crank also in great shape $100 plus shipping SOLD
Full rebuild kit with gaskets, bearings, water pump, oil pump, timing belt, rings (I think), and TRD MLS gasket $200 (not pictured and crank seal, cam seal but I do have these. I also have the rings which are NPR. These are replacements from a parts store.

Image

MegaSquirt ECU $150 (comes with tester) (I also have EDIS setup that is complete. Everything for $175 shipped

Image

Image

Rear end rebuild kit with all wheel bearings, differential bearings, pnion bearing and solid pinion spacer $250

OBXr LSD new in the box $250


ARP head studs (were installed and torqued and missing washers), Main Bolts, and flywheel bolts all new in the box for $200

Image

I also have 2 full quarter panels for the a GTS Hatch back that are in perfect shape. No rust anywhere. I don't know a price on these but will be impossible to ship.

I am sure there are other stuff I am forgetting. All prices are shipping including unless noted otherwise.

I would love to sale all of this at one time. I think I also have a set of forged pistons but the prior owner said they needed work to fit the 4AGE.

Thanks

I have sold on eBay and no negative feedback. I am an Audi owner as well.

I can be contacted at

zandrewzoo@gmail.com
Last edited by zandrew on Wed Feb 27, 2013 5:31 pm, edited 2 times in total.

User avatar
roach_86
Club4AG Regular
Posts: 40
Joined: Sun Jan 13, 2013 7:56 pm
Location: Germany.....

Re: Crap Load of 4AGE parts... EAST COAST

Postby roach_86 » Sun Feb 24, 2013 9:48 pm

pm sent on the crank!
84- AE86 Spinter GT-APEX
Image

zandrew
Club4AG Regular
Posts: 10
Joined: Sun Feb 24, 2013 8:00 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby zandrew » Sun Feb 24, 2013 9:55 pm

roach-86

I don't mind shipping the crank to you as long as you will pay shipping cost. I hope it is not something rediculous.

User avatar
roach_86
Club4AG Regular
Posts: 40
Joined: Sun Jan 13, 2013 7:56 pm
Location: Germany.....

Re: Crap Load of 4AGE parts... EAST COAST

Postby roach_86 » Mon Feb 25, 2013 1:55 am

It mostlikly will be crazy, but yeah just let me know the total and I might pick the rods and some more parts if not an issue!!!
84- AE86 Spinter GT-APEX
Image

wattsupbr86
Club4AG Enthusiast
Posts: 82
Joined: Thu Jan 10, 2013 3:47 am

Re: Crap Load of 4AGE parts... EAST COAST

Postby wattsupbr86 » Mon Feb 25, 2013 6:58 am

Emailed you! Wattsupbr86@gmail or just text me 909561five795

ga_goosh
Club4AG Pro
Posts: 542
Joined: Thu Jan 10, 2013 12:28 pm
Location: Texas

Re: Crap Load of 4AGE parts... EAST COAST

Postby ga_goosh » Mon Feb 25, 2013 8:37 am

what megasquirt is that ecu and is it built all ready? if so did you assemble it? do you know what pcb it has? thanks let me know
I <3 my AE86

4AG Manual
AE86 FSM

zandrew
Club4AG Regular
Posts: 10
Joined: Sun Feb 24, 2013 8:00 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby zandrew » Mon Feb 25, 2013 10:59 am

Roach-86- The price to ship the crank could be as little as $15 with a flat rate or as much as $80. It just depends. I am pretty good on getting things in boxes and USPS still taking them.

I texted the guy about the Mega Squirt and it supposed to be a MS1 V2.2. He said it was the simplest offering they had but they are supoosed to work fine. It has harness that is ready to plug into the stock harness.

I will be getting pictures tomorrow for sure.

runkillerrabbit
Club4AG Enthusiast
Posts: 147
Joined: Mon Jan 14, 2013 9:39 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby runkillerrabbit » Mon Feb 25, 2013 11:22 am

interested in megasquirt
FIDM fashion design
ITT tech electrical engineer
FJC Fullerton automotive program




R2D2 build log

wattsupbr86
Club4AG Enthusiast
Posts: 82
Joined: Thu Jan 10, 2013 3:47 am

Re: Crap Load of 4AGE parts... EAST COAST

Postby wattsupbr86 » Mon Feb 25, 2013 4:44 pm

Pmd you on the mega squirt! Contact me

zandrew
Club4AG Regular
Posts: 10
Joined: Sun Feb 24, 2013 8:00 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby zandrew » Tue Feb 26, 2013 2:30 pm

I am going to try and get some pictures tonight but it is cold and raining so it might not be till tomorrow.

I also have J&S safe guard it is for knock detection and it will retard timing and advance timing based off of spark knock. A must have for anyone going FI that does not have a knock sensor. These things are insane.

I am asking $250 shipped for it. It is the older model.

I also have a perfect power SMT6 that will work with stock 4AGE ECU. It has MAF compatability from 0-9v.

$150 shipped for it.

I also have a set of Supra 440cc injectors as well.

Nine-Breaker
Club4AG Regular
Posts: 44
Joined: Thu Jan 17, 2013 11:17 pm
Location: Seatac, WA

Re: Crap Load of 4AGE parts... EAST COAST

Postby Nine-Breaker » Tue Feb 26, 2013 7:27 pm

More info on the 4AGE Rebuild kit please. What brand are the parts? Size of rings? Size of bearings? Pictures of the whole kit please! If it's OEM Toyota, I'll take it.

Lowtekk
Club4AG Enthusiast
Posts: 60
Joined: Thu Jan 10, 2013 12:41 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby Lowtekk » Wed Feb 27, 2013 1:25 pm

Any pics of the quarter panels? I assume they were correctly removed from a car and not magically new?

User avatar
Grant
Club4AG Expert
Posts: 407
Joined: Wed Jan 09, 2013 8:42 pm
Location: Upstate New York

Re: Crap Load of 4AGE parts... EAST COAST

Postby Grant » Wed Feb 27, 2013 2:12 pm

Nine-Breaker wrote:More info on the 4AGE Rebuild kit please. What brand are the parts? Size of rings? Size of bearings? Pictures of the whole kit please! If it's OEM Toyota, I'll take it.

I also want info on the rebuild kit...

zandrew
Club4AG Regular
Posts: 10
Joined: Sun Feb 24, 2013 8:00 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby zandrew » Wed Feb 27, 2013 5:29 pm

The quarter panels are stored at a garage and they were removed correctly. I actually have the inside and outside panel. They were cut behind the bumper, in the door jamb about 12 inches in, and about 1/3 the way up on both the B and C pillar. I will get pictures friday of them.

The rebuild kit uses King Bearings for the Main, Rods, and thrust bearing, It has a GMB water pump which is manufactured in Japan. The water pump is Brand new but I can not remember its origin but it was bought at the parts store as well. The timing belt is Gates. The gaskets are parts store brand as well. The TRD HG is of course from Toyota. The rings are NPR which are the same brand as what Toyota uses. I have lowered the price of the rebuild kit too $200 shipped.

User avatar
Grant
Club4AG Expert
Posts: 407
Joined: Wed Jan 09, 2013 8:42 pm
Location: Upstate New York

Re: Crap Load of 4AGE parts... EAST COAST

Postby Grant » Thu Feb 28, 2013 10:27 am

Wow I wish I was closer and could pick up those quarter panels. Mine have a couple small rust spots.
I would buy that rebuild kit, but I am not sure if the engine even needs rebuilding yet. I was just going to replace all the gaskets and belts for now.
If you still have the stuff in a few weeks I'll get them, but I doubt you will. :P
Good luck with the sale.

8Ton
Club4AG Regular
Posts: 40
Joined: Sat Mar 02, 2013 5:16 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby 8Ton » Sat Mar 02, 2013 7:35 pm

Is the $175 for the EDIS and MS? or did i misunderstand? Very interested in it and several other things, please email me @ Johnny_c63@yahoo.com

rcmr2
Posts: 2
Joined: Fri Mar 08, 2013 1:39 am

Re: Crap Load of 4AGE parts... EAST COAST

Postby rcmr2 » Thu Mar 21, 2013 11:13 pm

emailed about the rebuild kit

ga_goosh
Club4AG Pro
Posts: 542
Joined: Thu Jan 10, 2013 12:28 pm
Location: Texas

Re: Crap Load of 4AGE parts... EAST COAST

Postby ga_goosh » Fri Mar 22, 2013 7:52 am

zandrew wrote:MegaSquirt ECU $150 (comes with tester) (I also have EDIS setup that is complete. Everything for $175 shipped

Image
zandrewzoo@gmail.com


what ms is this?
I <3 my AE86

4AG Manual
AE86 FSM

Ultimx
Club4AG Enthusiast
Posts: 84
Joined: Thu Jan 10, 2013 10:46 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby Ultimx » Mon Mar 25, 2013 4:54 pm

Sent u a email

Evo_lucian
Club4AG Enthusiast
Posts: 60
Joined: Thu Jan 10, 2013 10:46 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby Evo_lucian » Sun Aug 04, 2013 7:03 am

Interested in edis set up. Shoot me an email at nervedog@hotmail.com

zandrew
Club4AG Regular
Posts: 10
Joined: Sun Feb 24, 2013 8:00 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby zandrew » Sun Aug 04, 2013 5:25 pm

Sorry guys all this is sold except the ARP flywheel bolts.

nekoabandoned
Club4AG Regular
Posts: 24
Joined: Sat Apr 13, 2013 9:47 am

Re: Crap Load of 4AGE parts... EAST COAST

Postby nekoabandoned » Sun Aug 04, 2013 7:45 pm

sent pm , text me back asap!

cpoku
Posts: 3
Joined: Thu Jan 10, 2013 10:31 pm

Re: Crap Load of 4AGE parts... EAST COAST

Postby cpoku » Sat Aug 31, 2013 6:39 pm

do you have pics of the small port fuel rail?