Over the last few months we've been working super hard and releasing all kinds of new parts! Check it out! Many of our parts are available in multiple colors not pictured here.
Contact us at:
Techno Toy Tuning
4211-A Business Dr.
Shingle Springs, CA 95682
(530)672-8600
ggtyler@yahoo.com
And be sure to check out our site at [url]TechnoToyTuning.com[/url]
AE86 Master Cylinder Brace for LHD cars $80
Shock Tower Plates for the AE86 $140
TE72, AE71 etc... Front and rear door Cards $140 front, $100 Rear
4" Shifter extension in stainless for all Toyotas 12mm x 1.25 $45
Rear interior Side Panels for AE86 Coupe and Hatch $90 for the coupe, $100 for the hatch
Trunk panels for the AE86 hatch $70
Lexan side windows for the AE86 Coupe $90
Lexan rear windows for the AE86 Coupe $90
Supports for Rear Lexan Window on AE86 Coupe $40
AE86 Coupe C-Pillar Bar in fine wrinkle black or metallic blue powdercoating $90
AE86 Limited Edition Black Camber Plates $190
AE86 Manual Rack Swap MK3 Intermediate Shafts $80
AE86 Coupe Rear Firewall $75
AE86 Coupe Rear Parcel Shelf $50
KP61 Aluminum Hatch Wing $120
KP61 Door Cards $150
KP61 Rear interior Side Panels $90
KP61 Trunk panels $60
KP61 Lexan Quarter Windows $90
KP61 Engine Cowl Cover $75
AE86 an KP61 Spare Tire Cover $60
Injector Plugs for 4AG $25
Racing Deadpedal for the KP61 $80
Rear Big Brake Kit for the AE86 (with e-brake) Available for the Celica/Supra 7.5" rear end as well $950
Tall Short Shift Kit for the AE86 Corolla or all T50 Transmissions $180
AE86 Brake Master Cylinder Heat Shield $60
4AG 16V Distributor Heat shield $40
Zero Ackerman Power Steering Knuckles $240 with outer tie rods. These are for pro use only, and have had mixed results for the medium level drivers.
AW11 MR2 TC Rods (allows 2.5 to 8 degrees of caster) $220
14 Piece Sticker Pack $20
4AG ITB adapters now available in Gold, Red, Blue or Silver $295
NCRCA Negative Camber Roll Center Adjusters now available for all 90mm and 85mm strut casings such as MA60, MX73, RA64, MX32, KE70 and KE30 $140
Techno Toy Tuning T-shirts $20
Universal 4AG ITB adapter flanges and tubes for the DIY builder $160 a set of 4, or $240 a set of 6
KP61, AE86, TE72, MA60 & More NEW PARTS - Techno Toy Tuning
-
- Club4AG Regular
- Posts: 18
- Joined: Fri Jan 11, 2013 9:58 pm
Re: KP61, AE86, TE72, MA60 & More NEW PARTS - Techno Toy Tun
Very cool stuff Tyler! When are we going to see AE86 door panels to match the other panels?
Eric'sFreeAE86 from the old site
Knockoff Crew member #0001
Knockoff Crew member #0001
-
- Club4AG Regular
- Posts: 18
- Joined: Fri Jan 11, 2013 9:58 pm
Re: KP61, AE86, TE72, MA60 & More NEW PARTS - Techno Toy Tun
Carbd7AGE: I have the AE86 door cards already cut, just waiting on some custom dies to come in so we can put the bends in them that are needed.
-
- Club4AG Regular
- Posts: 38
- Joined: Fri Jan 11, 2013 10:38 pm
Re: KP61, AE86, TE72, MA60 & More NEW PARTS - Techno Toy Tun
Gabe some real nice stuff you are producing. When are we going to see equal length 4 link kit for ae86? Really excited about that and possibly wanting to buy the rear wilwoods. How do you get the ebrake to work?
-
- Club4AG Regular
- Posts: 18
- Joined: Fri Jan 11, 2013 9:58 pm
Re: KP61, AE86, TE72, MA60 & More NEW PARTS - Techno Toy Tun
I'll have the laser cut first prototypes done for the equal length 4 link boxes in about 5 days. We'll see then if I need to make any adjustments.
The rear Wilwood caliper has a built in E-brake and comes with all necessary cables and such.
The rear Wilwood caliper has a built in E-brake and comes with all necessary cables and such.
-
- Club4AG Regular
- Posts: 38
- Joined: Fri Jan 11, 2013 10:38 pm
Re: KP61, AE86, TE72, MA60 & More NEW PARTS - Techno Toy Tun
Awesome news about the equal length 4 link. Would you be willing to do any package deals if i buy both front and rear brakes?? Wilwood?
-
- Club4AG Enthusiast
- Posts: 134
- Joined: Thu Jan 24, 2013 9:07 am
Re: KP61, AE86, TE72, MA60 & More NEW PARTS - Techno Toy Tun
I cant wait to finish making my intake manifold. Those injector plugs are going to look pretty pretty pretty, thank you very much for making those. My rubber stoppers dont hold up well with my new 83mm bore.
Re: KP61, AE86, TE72, MA60 & More NEW PARTS - Techno Toy Tun
Gabriel Tyler wrote:I'll have the laser cut first prototypes done for the equal length 4 link boxes in about 5 days. We'll see then if I need to make any adjustments.
Holy smokes that's awesome!
-
- Club4AG Pro
- Posts: 582
- Joined: Wed Jan 09, 2013 6:10 pm
Re: KP61, AE86, TE72, MA60 & More NEW PARTS - Techno Toy Tun
the amount of new stuff you guys are making, AMAZING!!
Racing Deadpedal for the KP61 $80
Do you make a dead pedal for the ae86?
This is my first usdm ae86 and the lack of a dead pedal drives me nuts.
Racing Deadpedal for the KP61 $80
Do you make a dead pedal for the ae86?
This is my first usdm ae86 and the lack of a dead pedal drives me nuts.
RTFM!!!!!!!!!!! --> http://www.aeu86.org/technical/