20V Blacktop Head, cleaned with polished chambers

Post Reply
Crownvicman289
Club4AG Enthusiast
Posts: 129
Joined: Thu Jan 10, 2013 10:32 pm
Location: Colorado Springs, CO

20V Blacktop Head, cleaned with polished chambers

Postby Crownvicman289 » Tue Jun 03, 2014 8:47 pm

This was going to top my 20V super GZE, but I never built it. I didn't get very far on porting, just skimmed the intakes with some 120 grit and polished the chambers. No reshaping or anything crazy. After polishing, I had the head skimmed then subsequently hot tanked to ensure all the metal flakes found their way out. It also did wonders to its appearance, not a spec of carbon or discoloration inside the head. Now it's reassembled and ready for consumption. Includes OCV, stock head bolts, IACV, and the plastic upper cover. $350 + shipping. Email/paypal d_mozader@hotmail.com.

Image
Image
Image
Image
Image
Last edited by Crownvicman289 on Sun Jul 06, 2014 9:52 pm, edited 1 time in total.
Top
Crownvicman289
Club4AG Enthusiast
Posts: 129
Joined: Thu Jan 10, 2013 10:32 pm
Location: Colorado Springs, CO

Re: 20V Blacktop Head, cleaned with polished chambers

Postby Crownvicman289 » Mon Jun 23, 2014 6:15 pm

Bump. With as clean as this head is, it's bolt on and go. It's also ready for a MHG with its freshly machined deck.
Top
Crownvicman289
Club4AG Enthusiast
Posts: 129
Joined: Thu Jan 10, 2013 10:32 pm
Location: Colorado Springs, CO

Re: 20V Blacktop Head, cleaned with polished chambers

Postby Crownvicman289 » Sun Jul 06, 2014 9:53 pm

$350 + shipping.
Top
Crownvicman289
Club4AG Enthusiast
Posts: 129
Joined: Thu Jan 10, 2013 10:32 pm
Location: Colorado Springs, CO

Re: 20V Blacktop Head, cleaned with polished chambers

Postby Crownvicman289 » Thu Jul 17, 2014 9:07 pm

Sold!
Top
Post Reply

Return to “4A-GE Engine Parts”