1986 4age 16v injector clip

[RLZ]

The injector clips are kinda old and they are easy to break when you try to remove it, I header some Honda clips will fits but anyone know what model or what part number of it? Since Honda parts are easier to find I think! Thanks for any help!

[ZINCHOTRAN]

I bought from Herb and they came with the metal clips.

Herb Policarpio

e parts

Cabe Toyota
2895 Long Beach Blvd
Long Beach, CA 90806

e. herb@cabetoyota.com
tel 562.595.7411
fax 562.595.4740

cabeperformance.com
http://stores.ebay.com/Cabe-Toyota

[RLZ]

I bought from Herb and they came with the metal clips.

Herb Policarpio

e parts

Cabe Toyota
2895 Long Beach Blvd
Long Beach, CA 90806

e. herb@cabetoyota.com
tel 562.595.7411
fax 562.595.4740

cabeperformance.com
http://stores.ebay.com/Cabe-Toyota

They are current out of stock on their site tho, but I haven't contact them yet to confirm

[tiprock]

1st gen integra
early 90s accord.
iirc they have to be the dohc engines

[MisterJerk]

http://www.jegs.com/i/AEM/017/30-2020/10002/-1?CAWELAID=1710925473&CAGPSPN=pla&catargetid=230006180000848440&cadevice=c&gclid=CKCa6KvG88QCFcIdgQodhYIAOQ

I got these ones a few years ago and they work great, plus pretty simple to install.

[RLZ]

http://www.jegs.com/i/AEM/017/30-2020/10002/-1?CAWELAID=1710925473&CAGPSPN=pla&catargetid=230006180000848440&cadevice=c&gclid=CKCa6KvG88QCFcIdgQodhYIAOQ

I got these ones a few years ago and they work great, plus pretty simple to install.

are those come with wires? or just the clip itself?

[RLZ]

1st gen integra
early 90s accord.
iirc they have to be the dohc engines

thanks

[MisterJerk]

are those come with wires? or just the clip itself?

Just the bare terminals. makes a much cleaner install without splicing wires.

[RLZ]

Oh yeah that's true, thank you!

[MisterJerk]

its the best pic i have on my imgur album of them installed. pardon my mess... lol. its a couple years old.

[RLZ]

its the best pic i have on my imgur album of them installed. pardon my mess... lol. its a couple years old.

its nice and clean, thank you for your help

[RLZ]

its the best pic i have on my imgur album of them installed. pardon my mess... lol. its a couple years old.

its nice and clean, to replace them does it just release the wires from the old one and put the wires back on the new one? thanks

[MisterJerk]

it wasnt that easy. the wires have to pass through the plastic, then the terminals are crimped on and the wire with terminal is pulled into the connector until it clicks.


I removed the original terminals by uncrimping, and cleaning up the wires.

[RLZ]

it wasnt that easy. the wires have to pass through the plastic, then the terminals are crimped on and the wire with terminal is pulled into the connector until it clicks.


I removed the original terminals by uncrimping, and cleaning up the wires.

ok, got it, i will try it, thank you!