Who runs without timing belt covers ?

PDB · Postby **PDB** » Wed Jul 15, 2015 9:25 am

Love the look of the engines when all the front covers are removed, I fully understand what could happen, a stone or something snapping the belt etc etc

But how many run without covers, for how long, and who's had issues ?

Sent from my iPhone using Tapatalk

gotzoom? · Postby **gotzoom?** » Wed Jul 15, 2015 3:08 pm

I run them so that I don't break timing belts. Even with the covers, rocks find ways to get in and poke holes in the belt or grind parts of it away. I can't imagine running a timing belt engine without the covers, honestly.

midwest86 · Postby **midwest86** » Thu Jul 16, 2015 4:05 am

With a high compression engine that is no longer non-interference, I wouldn't dare risk my high dollar engine for something silly like that. I guess it comes down to whether you'd like to look at it or drive it.

davew7 · Postby **davew7** » Thu Jul 16, 2015 4:50 am

I've been running my 4AGE for over 30k miles without a cam belt cover. The belt is slight protected by a sump guard that extends below the crank damper. [On 99% paved roads] I believe the belt would survive pee size gravel. Dave W

LewyG · Postby **LewyG** » Thu Jul 16, 2015 9:05 am

I did for a year or so on my old engine circa 10 thousand miles and will be again on my new engine wich is a high comp build.

old

New

If a belt is going to break its more likely due to the fact it needed replacing , i think you would have to be seriously unlucky to have a stone or debris to get in there but im not saying it couldn't happen. I ran my car as a daily before but it will mostly be track and weekend toy now.

strmrdr23 · Postby **strmrdr23** » Thu Jul 16, 2015 10:32 am

i just rock the clear cover...

trigun402 · Postby **trigun402** » Thu Jul 16, 2015 6:13 pm

The clear cover is pretty sweet.

ToeKnee805 · Postby **ToeKnee805** » Fri Jul 17, 2015 12:04 am

ran mine coverless for about 5 years, no problem here. And i track my car more than i street it. Makes replacing the belt super easy for me. I just run the bottom cover to check the timing marks

PDB · Postby **PDB** » Fri Jul 17, 2015 6:28 am

I'm currently running a clear cover which is cool, but I really dig the rawness of no covers or backplates.

My car is purely a track & show car with the odd Sunday drive.

I'm building a turbo'd 4AGZE do it's still a non interference engine, my thinking is, should it snap it's no massive issue ?

Sent from my iPhone using Tapatalk

Ratranger · Postby **Ratranger** » Sun Jul 19, 2015 6:57 am

My car just snapped the belt with the covers on. Had enough energy to destroy the lower cover. So now it has no cover since I don't have the parts to run the full cover.

The way I see it, it can't be any worse than the ducatis that people run the belts open on. Their belts are right where the front tire throws road grime.

Postby **aceforever** » Sun Jul 26, 2015 10:10 pm

I run with the clear plastic covers just for ease of mind. The engine bay is pretty open on our cars, so it's better to be safe than sorry.

I can see the point of not using them though. Looks raw and since the 4AGE have non-interference valves, it's not the end of the world.